54ABT16500 18-Bit Universal Bus Transceivers with TRI-STATE Outputs
54ABT16500
July 1998
54ABT16500
18-Bit Universal Bus Transceivers with TRI-STATE
®
Outputs
General Description
These 18-bit universal bus transceivers combine D-type
latches and D-type flip-flops to allow data flow in transparent,
latched, and clocked modes.
Data flow in each direction is controlled by output-enable
(OEAB and OEBA), latch-enable (LEAB and LEBA), and
clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the
device operates in the transparent mode when LEAB is high.
When LEAB is low, the A data is latched if CLKAB is held at
a high or low logic level. If LEAB is low, the A bus data is
stored in the latch/flip-flop on the high-to-low transition of
CLKAB. Output-enable OEAB is active-high. When OEAB is
high, the outputs are active. When OEAB is low, the outputs
are in the high-impedance state.
Data flow for B to A is similar to that of A to B but uses OEBA,
LEBA, and CLKBA. The output enables are complementary
(OEAB is active high and OEBA is active low).
To ensure the high-impedance state during power up or
power down, OE should be tied to GND through a pulldown
resistor; the minimum value of the resistor is determined by
the current-sourcing capability of the driver.
Features
n
Combines D-Type latches and D-Type flip-flops for
operation in transparent, latched, or clocked mode
n
Flow-through architecture optimizes PCB layout
n
Guaranteed latch-up protection
n
High impedance glitch free bus loading during entire
power up and power down cycle
n
Non-destructive hot insertion capability
n
Standard Microcircuit Drawing (SMD) 5962-9687001
Ordering Code
Military
54ABT16500W-QML
Package
Number
WA56A
56-Lead Cerpack
Package Description
TRI-STATE
®
is a registered trademark of National Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS100225
www.national.com
1
PrintDate=1998/07/14 PrintTime=11:08:55 43605 ds100225 Rev. No. 1
cmserv
Proof
1
NSC [ NATIONAL SEMICONDUCTOR ]
