欢迎访问ic37.com |
会员登录 免费注册
发布采购

30134-23 参数 Datasheet PDF下载

30134-23图片预览
型号: 30134-23
PDF下载: 下载PDF文件 查看货源
内容描述: 的Geode ™ GXLV处理器系列的低功耗X86集成解决方案 [Geode⑩ GXLV Processor Series Low Power Integrated x86 Solutions]
分类和应用: 外围集成电路时钟
文件页数/大小: 247 页 / 4117 K
品牌: NSC [ National Semiconductor ]
 浏览型号30134-23的Datasheet PDF文件第28页浏览型号30134-23的Datasheet PDF文件第29页浏览型号30134-23的Datasheet PDF文件第30页浏览型号30134-23的Datasheet PDF文件第31页浏览型号30134-23的Datasheet PDF文件第33页浏览型号30134-23的Datasheet PDF文件第34页浏览型号30134-23的Datasheet PDF文件第35页浏览型号30134-23的Datasheet PDF文件第36页  
Signal Definitions (Continued)  
2.2.1 System Interface Signals (Continued)  
BGA  
SPGA  
Signal Name  
Pin No. Pin No.  
Type  
Description  
SMI#  
C19  
B28  
I
System Management Interrupt  
SMI# is a level-sensitive interrupt. SMI# puts the GXLV proces-  
sor into System Management Mode (SMM).  
SUSP#  
H2  
M4  
I
Suspend Request  
(PU)  
(PU)  
This signal is used to request that the GXLV processor enter  
Suspend mode. After recognition of an active SUSP# input, the  
processor completes execution of the current instruction, any  
pending decoded instructions and associated bus cycles.  
SUSP# is enabled by setting the SUSP bit in CCR2, and is  
ignored following RESET. (See Table 3-11 on page 52 for CCR2  
bit definitions.)  
Since the GXLV processor includes system logic functions as  
well as the CPU core, there are special modes designed to sup-  
port the different power management states associated with  
APM, ACPI, and portable designs. The part can be configured to  
stop only the CPU core clocks, or all clocks. When all clocks are  
stopped, the external clock can also be stopped. (See Section  
5.0 “Power Management” on page 176 for more details regarding  
power management states.)  
This pin is internally connected to a weak (>20-kohm) pull-up  
resistor.  
SUSPA#  
E2  
H4  
O
Suspend Acknowledge  
Suspend Acknowledge indicates that the GXLV processor has  
entered low-power Suspend mode as a result of SUSP# asser-  
tion or execution of a HALT instruction. SUSPA# floats following  
RESET and is enabled by setting the SUSP bit in CCR2. (See  
Table 3-11 on page 52 for CCR2 bit definitions.)  
The SYSCLK input may be stopped after SUSPA# has been  
asserted to further reduce power consumption if the system is  
configured for 3V Suspend mode. (see Section 5.1.4 “3 Volt Sus-  
pend” on page 177 for details regarding this mode).  
SERIALP  
L3  
Q1  
O
Serial Packet  
Serial Packet is the single wire serial-transmission signal to the  
CS5530 chip. The clock used for this interface is SYSCLK. This  
interface carries packets of miscellaneous information to the  
chipset to be used by the VSA technology software handlers.  
www.national.com  
32  
Revision 1.1  
 复制成功!