Integrated Functions (Continued)
Table 4-30. Display Controller Memory Organization Registers (Continued)
Bit
Name
FB_LINE_
DELTA
Description
9:0
Frame Buffer Line Delta: This value represents number of DWORDs that, when added to the starting
offset of the previous line, will point to the start of the next frame buffer line in memory. It is used to
always maintain a pointer to the starting offset for the frame buffer line being loaded into the display
FIFO.
GX_BASE+8328h-832Bh
DC_BUF_SIZE Register (R/W) (Locked)
Reserved: Set to 0.
Default Value = xxxxxxxxh
31:30
29:16
RSVD
VID_BUF_
SIZE
Video Buffer Size: These bits set the video buffer size, in 64-byte segments. The maximum size is 1
MB.
15:9
8:0
CB_LINE_
SIZE
Compressed Display Buffer Line Size: This value represents the number of DWORDs for a valid com-
pressed line plus 1. It is used to detect an overflow of the compressed data FIFO. It should never be
larger than 41h since the maximum size of the compressed data FIFO is 64 DWORDs.
FB_LINE_
SIZE
Frame Buffer Line Size: This value specifies the number of QWORDS (8-byte segments) to transfer for
each display line from the frame buffer.
If panning is enabled, this value can generally be programmed to the displayed number of QWORDS + 2
so that enough data is transferred to handle any possible alignment. Extra pixel data in the FIFO at the
end of a line will automatically be discarded.
GX_BASE+832Ch-832Fh
Reserved
Default Value = 00000000h
Revision 1.1
149
www.national.com