Test Circuitry
(TTL-to-ECL)
DS100306-7
Note 15:
R
T
= 50Ω termination resistive load. When an input or output is being monitored by a scope, R
T
is supplied by the scope’s 50Ω input resistance. When
an input or output is not being monitored, an external 50Ω resistance must be applied to serve as R
T
.
Note 16:
TTL and ECL force signals are brought to the DUT via 50Ω coax lines.
Note 17:
V
TTL
is decoupled to ground with 0.1 µF, V
EE
is decoupled to ground with 0.01 µF and V
CC
is connected to ground.
FIGURE 1. TTL-to-ECL AC Test Circuit
Switching Waveforms
(TTL-to-ECL)
DS100306-9
FIGURE 2. TTL to ECL Transition — Propagation Delay and Transition Times
7
www.national.com