5087 series
Please pay your attention to the following points at time of using the products shown in this document.
1. The products shown in this document (hereinafter ”Products”) are designed and manufactured to the generally accepted standards of
reliability as expected for use in general electronic and electrical equipment, such as personal equipment, machine tools and
measurement equipment. The Products are not designed and manufactured to be used in any other special equipment requiring
extremely high level of reliability and safety, such as aerospace equipment, nuclear power control equipment, medical equipment,
transportation equipment, disaster prevention equipment, security equipment. The Products are not designed and manufactured to be
used for the apparatus that exerts harmful influence on the human lives due to the defects, failure or malfunction of the Products.
If you wish to use the Products in that apparatus, please contact our sales section in advance.
In the event that the Products are used in such apparatus without our prior approval, we assume no responsibility whatsoever for any
damages resulting from the use of that apparatus.
2. NPC reserves the right to change the specifications of the Products in order to improve the characteristics or reliability thereof.
3. The information described in this document is presented only as a guide for using the Products. No responsibility is assumed by us for any
infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise
under any patents or other rights of the third parties. Then, we assume no responsibility whatsoever for any damages resulting from that
infringements.
4. The constant of each circuit shown in this document is described as an example, and it is not guaranteed about its value of the mass
production products.
5. In the case of that the Products in this document falls under the foreign exchange and foreign trade control law or other applicable laws and
regulations, approval of the export to be based on those laws and regulations are necessary. Customers are requested appropriately take
steps to obtain required permissions or approvals from appropriate government agencies.
SEIKO NPC CORPORATION
1-9-9, Hatchobori, Chuo-ku,
Tokyo 104-0032, Japan
Telephone: +81-3-5541-6501
Facsimile: +81-3-5541-6510
http://www.npc.co.jp/
Email:sales@npc.co.jp
ND12013-E-00 2012.04
SEIKO NPC CORPORATION - 15
NPC [ NIPPON PRECISION CIRCUITS INC ]
