欢迎访问ic37.com |
会员登录 免费注册
发布采购

A13KV1-CB 参数 Datasheet PDF下载

A13KV1-CB图片预览
型号: A13KV1-CB
PDF下载: 下载PDF文件 查看货源
内容描述: [General Specifications]
分类和应用:
文件页数/大小: 7 页 / 256 K
品牌: NKK [ NIHON KAIHEIKI INDUSTRY CO. LTD. ]
 浏览型号A13KV1-CB的Datasheet PDF文件第2页浏览型号A13KV1-CB的Datasheet PDF文件第3页浏览型号A13KV1-CB的Datasheet PDF文件第4页浏览型号A13KV1-CB的Datasheet PDF文件第5页浏览型号A13KV1-CB的Datasheet PDF文件第6页浏览型号A13KV1-CB的Datasheet PDF文件第7页  
Series A  
Process Sealed Subminiature Rockers  
General Specifications  
B
Electrical Capacity (Resistive Load)  
Logic Level: 0.4VA maximum @ 28V AC/DC maximum  
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)  
Note: Find additional explanation of operating range in Supplement section.  
Other Ratings  
Contact Resistance: 50 milliohms maximum  
Insulation Resistance: 500 megohms minimum @ 500V DC  
Dielectric Strength: 500V AC minimum for 1 minute minimum  
Mechanical Life: 100,000 operations minimum for On-None-On & On-Off-On  
50,000 operations minimum for other circuits  
Electrical Life: 50,000 operations minimum  
Nominal Operating Force: 2.73N (momentary); 1.84N (maintained)  
Contact Timing: Nonshorting (break-before-make)  
Angle of Throw: 26°  
Materials & Finishes  
Actuator or Toggle: Nickel plated brass  
Case Housing: Glass fiber reinforced polyamide  
Support Bracket: Tin plated phosphor bronze  
Movable Contact: Phosphor bronze with gold plating  
Stationary Contacts: Brass with gold plating  
Terminals: Brass with gold plating  
Environmental Data  
Operating Temperature Range: –30°C through +85°C (–22°F through +185°F)  
Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)  
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning  
in 1 minute; 3 right angled directions for 2 hours  
Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)  
Installation  
Cap Installation Force: 39.23N (8.82 lbf) maximum downward force on actuator  
PCB Processing  
Soldering: Wave Soldering Recommended: See Profile A in Supplement section.  
Manual Soldering: See Profile B in Supplement section.  
Cleaning: Automated cleaning. See Cleaning specifications in Supplement section.  
Standards & Certifications  
The A Series rockers have not been tested for UL recognition or CSA certification.  
These switches are designed for use in a low-voltage, low-current, logic-level circuit.  
When used as intended in a logic-level circuit, the results do not produce hazardous energy.  
B4  
www.nkkswitches.com