欢迎访问ic37.com |
会员登录 免费注册
发布采购

NJL10H380 参数 Datasheet PDF下载

NJL10H380图片预览
型号: NJL10H380
PDF下载: 下载PDF文件 查看货源
内容描述: [Logic Output Photo IC]
分类和应用: 远程控制输出元件光电
文件页数/大小: 3 页 / 42 K
品牌: NJRC [ NEW JAPAN RADIO ]
 浏览型号NJL10H380的Datasheet PDF文件第1页浏览型号NJL10H380的Datasheet PDF文件第2页  
Preliminary
PRECAUTION FOR HANDLING
1. Soldering to actual circuit board
Soldering condition
NJL10H000
- Heated condition of plastic package.
Lower than 240°C of maximum surface temperature, less than 30 seconds of time kept higher than 200°C.
Soldering Method
1) Reflow Method
Recommended temperature profile of its method.
Preparatory heating condition
: 120 to 150°C about 60 sec.
Recommended soldering temperature : 230 to 240°C about 3 to 5 sec.
Slowly cool down right after soldering.
Soldering to be done within twice under this condition.
(°C)
250
200
150
100
50
0
Time
2) Reflow Method
(In
case of infrared heating)
- Temperature profile : Same to the above
- Avoid direct irradiation to the plastic package because it is mold resin, absorbs the Infrared Radiation and its surface
temperature will be higher than lead itself.
3) The other method
Avoid rapid heating up like dipping the devices directly into the melting solder or vapor phase method
(VPS).
If the device is heated to high temperature and kept in its condition for longer time, it would affect to its reliability.
It is necessary to solder in short time as soon as possible.
Preparatory heating
60 to 120 sec.
Less than
30 sec.
3 to 5 sec.
240°C max.
2. Cleaning
Avoid washing of the device after soldering by reflow method.
3. Attention in handling
1) Avoid dust and any other foreign materials (paint, bonding material, etc.) on the lens surface.
2) When mounting, special care has to be taken on the mounting position and tilting of the device because it is very
important to place the device to the optimum position to the object.
4. Storage
In order to prevent from degradation of this device in moisturing at reflow method, so that this device is contained in
dampproof packaging. So that mount the device as short as possible after opening the envelope.
[CAUTION]
The specifications on this databook are
only
given for information , without any
guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative
usages