NJG1655SCC
!
TERMINAL INFORMATION
No.
2
SYMBOL
P2A
DESCRIPTION
The 2nd RF port of the 1st switch. This port is connected with PCA port.
PCB port is connected with P2B port at the same time. An external
capacitor is required to block DC voltage.
The 2nd RF port of the 2nd switch. This port is connected with PCB port.
PCA port is connected with P2A port at the same time. An external capacitor
is required to block DC voltage.
The 1st RF port of the 2nd switch. This port is connected with PCB port.
PCA port is connected with P1A port at the same time. An external capacitor
is required to block DC voltage.
The 1st RF port of the 1st switch. This port is connected with PCA port. PCB
port is connected with P1B port at the same time. An external capacitor is
required to block DC voltage.
Common RF port of the 2nd switch. This port is connected with either of
P1B, P2B, and P3B port. An external capacitor is required to block DC
voltage.
Common RF port of the 1st switch. This port is connected with either of
P1A, P2A, and P3A port. An external capacitor is required to block DC
voltage.
Positive voltage supply terminal. The positive voltage (+1.5~+4.5V) has to
be supplied. Please connect a bypass capacitor with GND terminal for
excellent RF performance.
Control signal input terminal.
This terminal is set to High-Level
(+1.3V~4.5V) or Low-Level (0~+0.4V).
Control signal input terminal.
This terminal is set to High-Level
(+1.3V~4.5V) or Low-Level (0~+0.4V).
The 3rd RF port of the 2nd switch. This port is connected with PCB port.
PCA port is connected with P3A port at the same time. An external capacitor
is required to block DC voltage.
The 3rd RF port of the 1st switch. This port is connected with PCA port.
PCB port is connected with P3B port at the same time. An external
capacitor is required to block DC voltage.
Ground terminal. Please connect this terminal with ground plane as close
as possible for excellent RF performance.
4
P2B
6
P1B
7
P1A
12
PCB
13
PCA
15
VDD
17
CTL2
18
CTL1
19
P3B
20
1,3,5,8,9,
10,11,14,
16
P3A
GND
-3-