Nichia STS-DA1-0045A
<Cat.No.071228>
Rank e1
0.4162 0.4390
0.4200 0.4310
Rank e2
0.4053 0.4255
0.3907 0.4000
0.4519
0.4086
0.4355
0.3785
x
y
x
y
0.3897
0.3823
0.3822
0.3580
0.4255
0.4000
0.4129
0.3725
0.3988
0.4116
0.3897
0.3823
0.4255
0.4000
0.4129
0.3725
x
y
x
y
0.4053
0.3907
0.3954
0.3642
0.4519
0.4086
0.4355
0.3785
Rank f4
0.4680 0.4970
0.4385 0.4466
Rank f6
0.4519 0.4770
0.4086 0.4137
0.4770
0.4137
0.4588
0.3838
x
y
x
y
Rank f3
0.4390 0.4680
0.4310 0.4385
Rank f5
0.4255 0.4519
0.4000 0.4086
Color Coordinates Measurement allowance is ± 0.01.
Basically, a shipment shall consist of the LEDs of a combination of the above ranks.
The percentage of each rank in the shipment shall be determined by Nichia.
Correspondence table of Color Coordinates – Luminous Flux ranks
Ranking by Luminous Flux
Ranking by Color Coordinates
P11
P12
P13
P14
P15
P16
d1, d2
e1, e2
f3, f4, f5, f6
2.INITIAL
OPTICAL/ELECTRICAL
CHARACTERISTICS
Please refer to “CHARACTERISTICS” on the following pages.
3.OUTLINE
DIMENSIONS
AND
MATERIALS
Please refer to “OUTLINE DIMENSIONS” on the following page.
: Ceramics
Package
Material as follows ;
: Silicone Resin (with Diffused + Phosphor)
Encapsulating Resin
: Au Plating
Electrodes
: Ag Plating Copper
Die Heat sink
4.PACKAGING
· The LEDs are packed in cardboard boxes after taping.
Please refer to “TAPING DIMENSIONS” and “PACKING ”on the following pages.
The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity
· In order to protect the LEDs from mechanical shock, we pack them in cardboard boxes for transportation.
· The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,
so precautions must be taken to prevent any damage.
· The boxes are not water resistant and therefore must be kept away from water and moisture.
· When the LEDs are transported, we recommend that you use the same packing method as Nichia.
-2-