Nichia STS-DA1-0106
<Cat.No.080220>
Rank e1
0.4162 0.4390
0.4200 0.4310
Rank e2
0.4053 0.4255
0.3907 0.4000
0.4519
0.4086
0.4355
0.3785
x
y
x
y
x
y
x
y
0.3897
0.3823
0.3822
0.3580
0.4255
0.4000
0.4129
0.3725
0.3988
0.4116
0.3897
0.3823
0.4255
0.4000
0.4129
0.3725
x
y
x
y
0.4053
0.3907
0.3954
0.3642
0.4519
0.4086
0.4355
0.3785
Rank f4
0.4680 0.4970
0.4385 0.4466
Rank f6
0.4519 0.4770
0.4086 0.4137
0.4770
0.4137
0.4588
0.3838
Rank f3
0.4390 0.4680
0.4310 0.4385
Rank f5
0.4255 0.4519
0.4000 0.4086
Color Coordinates Measurement allowance is ± 0.01.
Basically, a shipment shall consist of the LEDs of a combination of the above ranks.
The percentage of each rank in the shipment shall be determined by Nichia.
Correspondence table of Color Coordinates – Luminous Flux ranks
Ranking by Luminous Flux
Ranking by Color Coordinates
P4
P5
P6
P7
P8
d1, d2, e1, e2
f3, f4, f5, f6
Shaded ranks are available.
2.INITIAL
OPTICAL/ELECTRICAL
CHARACTERISTICS
Please refer to “CHARACTERISTICS” on the following pages.
3.OUTLINE
DIMENSIONS
AND
MATERIALS
Please refer to “OUTLINE DIMENSIONS” on the following page
: Ceramics
Material as follows ; Package
: Silicone Resin (with Diffused + Phosphor)
Encapsulating Resin
: Au Plating
Electrodes
4.PACKAGING
· The LEDs are packed in cardboard boxes after taping.
Please refer to “TAPING DIMENSIONS” and “PACKING ”on the following pages.
The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity
· In order to protect the LEDs from mechanical shock, we pack them in cardboard boxes for transportation.
· The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,
so precautions must be taken to prevent any damage.
· The boxes are not water resistant and therefore must be kept away from water and moisture.
· When the LEDs are transported, we recommend that you use the same packing method as Nichia.
-2-
NICHIA [ NICHIA CORPORATION ]
