Nichia STS-DA1-0013
<Cat.No.071019>
Rank a57
0.2720 0.2793 0.2820
0.2580 0.2755 0.2720
0.2910
0.2580
0.2960
0.2760
0.2910
0.2870
0.3062
0.2853
Rank a66
0.2880 0.2960
0.2620 0.2760
Rank bj2
0.2910 0.2990
0.2870 0.3010
Rank bj7
0.2887 0.2968
0.2916 0.3058
Rank bk6
0.3040 0.3120
0.2900 0.3040
0.2980
0.2710
0.3040
0.2900
0.2990
0.3010
0.3142
0.2993
Rank a62
0.2820 0.2910
0.2720 0.2870
Rank a67
0.2793 0.2887
0.2755 0.2916
Rank bj6
0.2960 0.3040
0.2760 0.2900
Rank bk2
0.2990 0.3070
0.3010 0.3150
Rank bk7
0.2968 0.3048
0.3058 0.3198
x
y
x
y
x
y
x
y
x
y
x
y
x
y
x
y
x
y
x
y
0.2880
0.2620
0.2820
0.2720
0.2980
0.2710
0.3040
0.2900
0.2990
0.3010
0.2960
0.2760
0.2910
0.2870
0.3062
0.2853
0.3120
0.3040
0.3070
0.3150
Color Coordinates Measurement allowance is ± 0.005.
Basically, a shipment shall consist of the LEDs of a combination of the above ranks.
The percentage of each rank in the shipment shall be determined by Nichia.
2.INITIAL
OPTICAL/ELECTRICAL
CHARACTERISTICS
Please refer to figure’s page.
3.OUTLINE
DIMENSIONS
AND
MATERIALS
:
:
:
Heat-Resistant Polymer
Silicone Resin (with Diffused + Phosphor)
Ag Plating Copper Alloy
Please refer to figure’s page.
Package
Material as follows ;
Encapsulating Resin
Electrodes
4.PACKAGING
· The LEDs are packed in cardboard boxes after taping.
Please refer to figure’s page.
The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity
· In order to protect the LEDs from mechanical shock, we pack them in cardboard boxes for transportation.
· The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,
so precautions must be taken to prevent any damage.
· The boxes are not water resistant and therefore must be kept away from water and moisture.
· When the LEDs are transported, we recommend that you use the same packing method as Nichia.
-2-