Device Components
Table 1 contains information about the components used for interfacing
and interacting with the USB-621x OEM device.
Table 1. USB-621x OEM Components
Reference
Designator(s)
Manufacturer
Part Number
Component
50-pin connector
on PCB
J6*, J7
J5
Manufacturer
3M
N2550-6002UB
USB connector
AMP
3M
787780-1
50-pin board mount socket†
—
8550-4500PL (or equivalent)
Mounting standoff,
using board mount socket
—
RAF Electronic M1261-3005-SS‡
Hardware with M3 × 0.5 screw
Mounting standoff,
using ribbon cable
—
RAF Electronic 2053-440-SS**
Hardware with 4-40 screw
* J6 is available on USB-6212/6216/6218 OEM devices only.
† You can use either one or both 50-pin connectors to board mount the USB-6212/6216/6218 OEM device.
‡ 3/16 in. HEX female-to-female, 14 mm long.
** 3/16 in. HEX female-to-female, 1/4 in. long.
Modifying the USB Device Name in Microsoft Windows
You can change how the USB-621x OEM device name appears when users
install the device in both the Found New Hardware Wizard that appears
when the device is initially installed and in the Windows Device Manager.
Windows Vista/XP Users
Figure 9 depicts how a USB-6211 (OEM) device name appears in the
Found New Hardware Wizard and Windows Device Manager.
NI USB-621x OEM User Guide
8
ni.com
NI [ National Instruments ]
