High-Value Embedded Controllers for PXI
Environment
Maximum altitude................................. 2,000 m (800 mbar)
Specifications
Specifications subject to change without notice.
(at 25 °C ambient temperature)
Features
Processor
Pollution degree....................................
Indoor use only.
2
PXI-8101............................................ Intel Celeron 575 2.0 GHz
PXI-8102............................................ Intel Celeron T3100 Dual Core 1.9 GHz
Chipset .................................................. Mobile Intel GM45 Express Chipset
Front-side bus
Operating Environment
Ambient temperature range1 ................ 5 to 50 °C2, 3
(tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2)
Relative humidity range........................ 10 to 90% noncondensing
(tested in accordance with
PXI-8101............................................ 667 MHz
PXI-8102............................................ 800 MHz
System memory (RAM)
IEC-60068-2-56)
1For chassis that are not available in the online catalog at ni.com, contact
National Instruments for supported operating temperatures.
25 to 40 °C for the NI PXI-1000B DC.
3Processor should not throttle CPU frequency under reasonable, worst case
processor workloads in high operating temperature.
Standard ........................................... 1 GB 800 MHz DDR2 RAM PC2 6400
Maximum.......................................... 4 GB 800 MHz DDR2 RAM PC2 6400
Ethernet................................................. 10/100/1000BASE-TX, RJ45 connector
Hard drive.............................................. 80 GB minimum, 5400 rpm, internal
2.5 in., 9.5 mm Serial ATA 1.0 interface
Storage Environment
Ambient temperature range.................. -40 to 65 °C
Video ..................................................... Integrated Graphics (Mobile Intel
GM45 Express Chipset)
(tested in accordance with
Serial..................................................... 1 (RS232)
Parallel .................................................. IEEE 1284 Type C miniature connector
(adapter cable not included)
IEC-60068-2-1 and IEC-60068-2-2)
Relative humidity range........................ 5 to 95% noncondensing
(tested in accordance
Hi-Speed USB........................................
2
with IEC-60068-2-56)
Power Requirements
Shock and Vibration
Current (A)
Operating shock .................................... 30 g peak, half-sine, 11 ms pulse
Typical
Voltage
Maximum
(tested in accordance with
(V)
+3.3
+5
PXI-8101
PXI-8102
2.50
PXI-8101
3.6
PXI-8102
4.80
IEC-60068-2-27; test profile developed
in accordance with MIL-PRF-28800F)
Random vibration
2.25
3.50
4.00
6.6
7.80
+12
-12
0.001
0.0
0.001
0 .0
0.075
0.0
0.075
0.0
Operating.......................................... 5 to 500 Hz, 0.3 grms
(with solid-state hard drive)
Nonoperating.................................... 5 to 500 Hz, 2.4 grms
(tested in accordance with
Physical
Board dimensions.................................. 2-slot 3U PXI module,
IEC-60068-2-64; nonoperating test
profile exceeds the requirements of
MIL-PRF-28800F, Class 3)
4.0 by 13 by 21.6 cm
(1.59 by 5.1 by 8.5 in.)
Slot requirements.................................. One system slot plus one controller
expansion slot
Compatibility......................................... Fully compatible with PXI Specification
Weight................................................... 0.645 kg (1.42 lb) typical
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
4
NI [ National Instruments ]
