High-Speed Digitizers – Optimized for Automated Test
Trigger System
Modes ................................................. Edge, hysteresis, window,
digital, immediate, software
Sources................................................ CH 0, CH 1, TRIG, PFI <0..1>
PXI_Trig <0..6>, PXI Star
Trigger, and Software
Slope ................................................... Rising or falling
Hysteresis............................................ Fully programmable
High-frequency reject filter................. 50 kHz software-selectable
Low-frequency reject filter ................. 50 kHz software-selectable
Sensitivity
CH 0 and CH 1
NI 5154 ....................................... 15% FS
NI 5152, NI 5153 ........................ 10% FS
TRIG
NI 5154 ....................................... 15% FS
NI 5153 ....................................... 10% FS
NI 5152 ....................................... 5% FS
Level accuracy
CH 0, CH 1 ...................................... ±5% FS up to 10 MHz
TRIG ................................................ ±1 V up to 10 MHz
Time resolution ................................... 5 ps with time-to-digital
converter enabled
Holdoff................................................. From Rearm Time up to
[(2
32
– 1) x Sample Clock Period]
Intermodule SMC Synchronization
Using NI-TClk (typical)
Skew.................................................... 500 ps,
≤5
ps after
manual adjustment
Power Requirements (typical)
NI 5154 PXI
PCI
NI 5153 PXI
PCI
NI 5152 PXI
PCI
+3.3 VDC (A) +5 VDC (A) +12 VDC (mA) -12 VDC (mA) Total Power (W)
1.7
1.8
520
200
23.25
2.3
2.3
214
0
21.66
1.7
1.8
520
200
23.25
2.3
2.3
214
0
21.66
1.1
1.9
500
210
21.65
2.5
2.4
200
0
22.65
Environment
Operating temperature ....................... 0 to +55 °C in all NI PXI
chassis except the following:
0 to +45 °C when installed in an
NI PXI-1000/B or PXI-101x
chassis (meets IEC 60068-2-1
and IEC 60068-2-2)
Storage temperature........................... -40 to +71 °C (meets IEC 60068-
2-1 and IEC 60068-2-2)
Relative humidity ................................ 10 to 90%, noncondensing
(meets IEC 60068-2-56)
External Trigger Channel (TRIG)
Impedance
NI 5154, NI 5153 ............................
NI 5152 ...........................................
Vertical range......................................
Coupling
NI 5154, NI 5153 ............................
NI 5152 ...........................................
2.25 kΩ
1 MΩ || 22 pF
±5 V
DC
AC, DC
Calibration
Self-calibration.................................... Gain, offset, triggering, and
timing for all input ranges;
1 MΩ attenuator (NI 5152 only)
External calibration interval................ 2 years
Certification and Compliances
CE Mark Compliance
For detailed specifications, visit
ni.com/manuals.
For certifications, marks, and DoCs, visit
ni.com/certification.
BUY ONLINE
at
ni.com
or
CALL 800 813 3693 (U.S.)
5
NI [ NATIONAL INSTRUMENTS CORPORATION ]
