CompactRIO
Accessories and Cables
SH68-C68-S Cable
– for connecting an
NI cRIO-9151 R Series expansion chassis
to the digital port on a PCI or PXI
R Series device. You can connect up to
two cRIO-9151 chassis to an NI 7831R
device, and up to four cRIO-9151 chassis
to a PXI-7811R device.
Note: Use only the SH68-C68-S digital cable with the cRIO-9151 chassis.
cRIO-9935 15-Pin Connector Kit
DIN-Rail Mounting Kits
– for mounting
4 or 8-slot CompactRIO embedded chassis
or cRIO-9151 R Series expansion chassis to
any standard 35 mm DIN rail. For high
shock and vibration applications, NI recommends a panel mounting
configuration rather than DIN rail. Panel mounting holes are built
into all CompactRIO Chassis. For detailed mounting instructions,
refer to the CompactRIO Installation Instructions manual for
your chassis.
cRIO-9912
cRIO-9915
DIN-rail mounting kit for 4-slot CompactRIO chassis
(embedded or expansion)
DIN-rail mounting kit for 8-slot CompactRIO chassis
(embedded or expansion)
Connectivity Accessories
The CompactRIO system is designed to provide flexible options
for low cost field wiring and cabling. The cRIO-9932 kit provides
strain relief and operator protection from high-voltage signals for
any 10-position screw terminal module. The cRIO-9935 (or other
15-pin D-Sub connector) is required for use with the cRIO-9411
module. The cRIO-9935 includes a screw terminal connector with
strain relief as well as a D-Sub solder cup backshell for creating
custom cable assemblies. The cRIO-9936 consists of 10 screw
terminal plugs for any 10-position screw terminal module. The
cRIO-9937 consists of ten 4-position power supply plugs for
CompactRIO real-time controllers.
Product
cRIO-9932
cRIO-9933
cRIO-9934
cRIO-9935
cRIO-9936
cRIO-9937
Description
Strain relief and high-voltage connector kit, 10-position screw-terminal
37-pin connector kit with strain relief
25-pin connector kit with strain relief
15-pin connector kit with strain relief
10-position screw-terminal plugs (quantity 10)
4-position controller power supply plugs (quantity 10)
CompactRIO
Accessories and cables
Power Supplies
NI offers a variety of UL approved
industrial power supplies. The PS-5 is a
DIN-rail-mountable 24 VDC power
supply that provides 5 A of current and is
rated for operation from -25 to 60 °C.
Two PS-5 supplies can be wired in
parallel to provide up to 10 A. The PS-5 is
recommended for heavy-duty industrial
installations. The PS-4 is a DIN-rail-
mountable 24 V power supply in FieldPoint packaging. The PS-3 and
PS-2 are power supply “bricks” with a universal IEC power input.
The PS-3 can also operate as a float charger for 12 VDC batteries. The
PS-1 is a wall-mount power supply.
Power Supply
PS-1
PS-2
PS-3
PS-4
PS-5
Output Capacity
20 VDC, 0.8 A
24 VDC, 0.8 A
13.8 VDC, 4 A
24 VDC, 0.625 A
24 VDC, 5 A
Input Voltage
120 VAC
Japan 100 VAC/US 120 VAC
North American 240 VAC
Japan 100 VAC/US 120 VAC
North American 240 VAC
UPI
UPI
Note: To meet shock and vibration requirements, you must affix
ferrules to the ends of the wires on all screw terminal connectors.
11
cRIO-9937
Power Supply Plugs
cRIO-9932 Strain Relief and
High-Voltage Connector Kit
cRIO-9936 10-position
screw terminal plugs
Visit
ni.com/compactrio
for up-to-date information on availability
of accessories.
For ordering information, see page 381.
BUY ONLINE or CALL (866) 265-9891!
Visit
ni.com
380
NI [ NATIONAL INSTRUMENTS CORPORATION ]
