Real-Time Embedded Controllers for PXI
a real-time OS, you must purchase a LabVIEW Real-Time run-time PXI Hardware for Real-Time Applications
license with your Windows-based controller.
The modularity of PXI and open connectivity of LabVIEW make it
easy to integrate a variety of I/O within your application. You can
take advantage of the timing and triggering functionality of PXI to
Integration with Mac OS X
The LabVIEW Real-Time Module and PXI are your solution for synchronize measurements across several I/O devices, increasing the
data acquisition, GPIB, serial, and Ethernet communication within performance of your real-time system.
the Mac OS X environment. Build your application on a host Mac
Create a custom real-time embedded solution using an RT Series PXI
OS X computer and download it directly to an RT Series embedded Embedded Controller with any number and combination of PXI plug-in
PXI controller.
modules. Built-in LabVIEW libraries help you create powerful
applications with data acquisition, dynamic signal acquisition,
motion control, image acquisition, and CAN communication. Use
PXI-8176 RT
The PXI-8176 RT is a high-performance PXI NI-VISA to integrate third-party PXI/CompactPCI modules in your
embedded controller capable of running a application. In addition, the RT Series PXI controllers include built-in
single PID loop at 39 kHz. With the 1.26 GHz Ethernet and serial ports. You can use these built-in ports to
Pentium III processor, the PXI-8176 RT is a communicate with peripheral devices while reserving slots in the PXI
high-end, real-time controller.
chassis for other measurement I/O devices. Table 2 lists all of the PXI
hardware you can use with LabVIEW Real-Time, with page references
for additional information.
PXI-8175 RT
The PXI-8175 RT contains an 866 MHz
Intel Pentium III processor capable of
running a single PID loop at 30 kHz.
Function
Data acquisition
Product
Page
197
199
362
432
386
220
270
PXI-61xx S Series multifunction DAQ
PXI-60xx E Series multifunction DAQ
PXI-67xx analog output
PXI-65xx digital I/O
PXI-660x counter/timer
PXI-7831R reconfigurable I/O2
All SCXI hardware except 112x
and 119x switching modules
All SCC hardware
PXI-8145 RT
The PXI-8145 RT controller is ideal for
low-cost, real-time applications. This series
of PXI controllers includes a low-power
Pentium 266 MHz processor capable of
running a single PID loop at up to 6 kHz.
The controllers module can withstand
higher vibration and shock because it
uses nonvolatile CompactFlash memory.
With the single-board architecture and
low-power processor, NI built this controller
for embedded applications where space
is limited.
SCXI and SCC
signal conditioning
251
448
402
488
488
497
492
603
633
636
638
665
717
747
Digitizers
Dynamic signal acquisition
Switches
PXI-5102
PXI-4472 24-bit dynamic signal acquisition
PXI-2501
PXI-2503
PXI-2565
PXI-2590
PXI-14xx image acquisition module1,2
PXI-7358 high-performance 8-axis motion controller
PXI-7344 high-performance 4-axis motion controller2
PXI-7334 low-cost 4-axis motion controller2
PXI-8232 GPIB/Gigabit Ethernet module
PXI-842x Serial interface modules
PXI-846x CAN interface modules2
Image acquisition
Motion control
Bus interfaces
PXI chassis expansion
PXI-833x MXI-3 for system expansion to multiple
PXI Chassis
157
1Requires LabVIEW Vision Development Module, version 6.1 or later 2Not supported under Mac OS X
Table 2. Additional Hardware for Real-Time Applications
138 National Instruments • Tel: (800) 433-3488 • Fax: (512) 683-9300 • info@ni.com • ni.com