Laptop Control of PXI with ExpressCard (ExpressCard MXI)
Specifications
Specifications are subject to change without notice.
Power Requirements
PXI-8360
Power Rail (V)
+3.3
+5
+12
-12
Typical Current
1.500 A
5 mA
5 mA
0 mA
Maximum Current
1.750 A
20 mA
20 mA
0 mA
NI ExpressCard-8360
Power Rail (V)
+3.3
+3.3 (AUX)
+1.5
Typical Current (mA)
220
20
0
Maximum Current (mA)
280
30
0
Physical
Dimensions
PXI-8360.............................................................................
NI ExpressCard-8360 ........................................................
Slot requirements
PXI-8360.............................................................................
NI ExpressCard-8360 ........................................................
Maximum cable length .........................................................
Compatibility .........................................................................
10.0 by 16.0 cm (3.9 by 6.3 in.)
10.2 by 3.4 cm (4.0 by 1.3 in.)
One 3U PXI system controller slot
One ExpressCard/34 or ExpressCard/54 slot
7m
Fully compatible with the PXI Hardware Specification, Revision 2.1, and the
PCMCIA ExpressCard Standard, Revision 1.0 or later
Operating Environment
PXI-8360
Ambient temperature range..............................................
Operating relative humidity...............................................
NI ExpressCard-8360
Ambient temperature range..............................................
Operating relative humidity...............................................
0 to 55 °C (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2)
10 to 90%, noncondensing (tested in accordance with IEC-60068-2-56)
0 to 65 °C (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2)
5 to 95%, noncondensing (tested in accordance with IEC-60068-2-56)
Storage Environment
Ambient temperature range .................................................. -20 to 70 °C (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2)
Storage relative humidity ...................................................... 5 to 95%, noncondensing (tested in accordance with IEC-60068-2-56)
Shock
Operational shock .................................................................. 30 g peak, half-sine, 11 ms pulse (tested in accordance with IEC-60068-2-27;
test profile developed in accordance with MIL-PRF-28800F)
Random Vibration
Operating ............................................................................... 5 to 500 Hz, 0.3 g
rms
Nonoperating ......................................................................... 5 to 500 Hz, 2.4 g
rms
(tested in accordance with IEC-60068-2-64; nonoperating test
profile exceeds the requirements of MIL-PRF-28800F, Class 3)
Note:
For full EMC compliance, operate this device with shielded cabling. In addition, all covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC) for this product
for any additional regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification,
search by model number or product line, and click the appropriate link in the
certification column.
BUY ONLINE
at
ni.com
or
CALL (800) 813 3693 (U.S.)
2
NI [ NATIONAL INSTRUMENTS CORPORATION ]
