High-Speed Voltage Output
Cables and Accessories
TB-2705
– 68-pin screw terminal block for PXI-671x and PXI-673x
modules. Latches to the front of your PXI module with locking
screws and provides strain relief as well as easy access to your analog,
digital, trigger and counter/timer signals through screw terminals.
Does not work with NI 6703 or NI 6704 devices.
TB-2705 ................................................................................778241-01
Dimensions – 8.43 by 10.41 by 2.03 cm (3.32 by 4.1 by 0.8 in.)
SHC68-68-EP
– Shielded cable for connecting and latching the
NI DAQCard-6715, NI 6722, and NI 6723 to standard 68-pin
accessories. Latching screws secure the shielded connector to the
device itself for stability. Use this cable for a DAQCard located in the
bottom PCMCIA slot of a laptop.
0.5 m....................................................................................186838-0R5
1 m ........................................................................................186838-01
Synchronization Cables
RTSI Bus Cables
– Used to connect timing and synchronization
signals among measurement, vision, motion, and CAN boards
for PCI. For systems with long and short boards, use the extended
RTSI cable.
2 boards ................................................................................776249-02
3 boards .................................................................................776249-03
4 boards ................................................................................776249-04
5 boards ................................................................................776249-05
Extended, 5 boards................................................................777562-05
SHC68U-68-EP
– Identical to the SHC68-68-EP, except that the
DAQCard connector is inverted so you can use two latching
DAQCards in adjacent slots. Use this cable with a DAQCard inserted
in the upper PCMCIA slot of a laptop.
0.5 m....................................................................................187406-0R5
1 m ........................................................................................187406-01
SH68-C68-S
– Shielded cable for connecting and latching NI 672x
devices to standard 68-pin accessories.
2 m ........................................................................................186381-02
Shielded I/O Cables
SH68-68-EP
– Shielded 68-conductor cable terminated with
two 68-pin female 0.050 series D-type connectors, featuring
individually shielded analog twisted pairs for reduced crosstalk
with high-speed devices. This cable works with all NI PCI-671x,
NI PXI-671x, and NI 673x devices.
1 m ........................................................................................184749-01
Ribbon I/O Cables
R6868
– 68-conductor flat ribbon cable terminated with two 68-pin
connectors. Use this cable to connect the NI 670x, NI PCI-671x,
NI PXI-671x, and NI 673x devices to low-cost 68-pin accessories.
1 m ........................................................................................182482-01
RC68-68
– 68-conductor flat ribbon cable terminated with one
VHDCI 68-pin connector and one 68-pin SCSI II connector. Use this
cable to connect the NI 6722 devices and DAQCard-6715 with
standard 68-pin accessories.
1 m ........................................................................................187252-01
TB-2705
RTSI Bus Cable
SH68-68-EP
Shielded Cable
SHC68-68-EP
R6868 Ribbon Cable
RC68-68 Ribbon Cable
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com
7
NI [ NATIONAL INSTRUMENTS CORPORATION ]
