S Series Multifunction DAQ
Specifications
The following specifications are typical at 25 °C unless otherwise noted.
Timing I/O
Counter/Timers
Number of channels .................................. 2 up/down counter/timers
Resolution.................................................. 24 bits
Compatibility.............................................. TTL/CMOS
Analog Input
Input Characteristics
Number of channels.........................................
ADC resolution .................................................
Sampling rate
Maximum...................................................
Minimum....................................................
Input coupling...................................................
Input range .......................................................
Input FIFO size ..................................................
Data transfers ..................................................
DMA mode .......................................................
8 differential
16 bits, 1 in 65,536
250 kS/s
0 S/s
DC
±5 V
2,046 samples
DMA, interrupts, programmed I/O
Scatter-gather
8 input/output
TTL/CMOS
Input (high-impedance)
DMA, interrupts, programmed I/O
Digital Trigger
Purpose ............................................................
External sources ...............................................
Compatibility ....................................................
Response ..........................................................
Pulse width.......................................................
Start, reference, and pause trigger; sample clock
PFI <0..9>, RTSI <0..6>
TTL
Rising or falling edge
10 ns min
RTSI Bus (PCI only)
Trigger lines <0..6>........................................... 7
RTSI clock ......................................................... 1
Digital I/O
Number of channels.........................................
Compatibility ....................................................
Power-on state .................................................
Data transfers ..................................................
PXI Trigger Bus (PXI only)
Trigger lines <0..5>........................................... 6
Star trigger ....................................................... 1
Clock ................................................................. 1
Physical
Dimensions (not including connectors) ........... 15.5 by 10.6 cm
(6.10 by 4.17 in.)
I/O connector.................................................... 68-pin VHDCI
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com
5
NI [ NATIONAL INSTRUMENTS CORPORATION ]
