NO
Item
Criterion
AQL
Symbols :
x: Chip length
k: Seal width
y: Chip width
t: Glass thickness a: LCD side length
z: Chip thickness
L: Electrode pad length
6.2 Protrusion over terminal :
6.2.1 Chip on electrode pad :
y: Chip width
y≦0.5mm
x: Chip length
x≦1/8a
z: Chip thickness
0 < z ≦ t
6.2.2 Non-conductive portion:
Glass
crack
06
2.5
y: Chip width
y≦ L
x: Chip length
x≦1/8a
z: Chip thickness
0 < z ≦ t
☉If the chipped area touches the ITO terminal, over 2/3 of the ITO must
remain and be inspected according to electrode terminal specifications.
☉If the product will be heat sealed by the customer, the alignment mark
not be damaged.
6.2.3 Substrate protuberance and internal crack.
y: width
y≦1/3L
x: length
x ≦ a
第 15 頁,共 20 頁