Quality Information
Test Item
High Temperature storage
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Content of Test
Endurance test applying the high
storage temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Test Condition
+70⁰C , 96hrs
‐20⁰C , 96hrs
+60⁰C , 96hrs
Note
2
1,2
2
‐10⁰C , 96hrs
1,2
+50⁰C , 90% RH , 96hrs
1,2
Vibration test
Static electricity test
Endurance test applying electric static
discharge.
‐10⁰C,30min ‐> 25⁰C,5min ‐>
60⁰C,30min = 1 cycle
100 cycles
10‐150Hz , 15mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=4KV, RS=330kΩ, CS=150pF
Five times
3
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25
⁰C, 0%RH.
Note 3:
Test performed on product itself, not inside a container.
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information
See Terms & Conditions at http://www.newhavendisplay.com/index.php?main_page=terms