MU9C Routing CoProcessor (RCP) Family
Control State Descriptions
CONTROL STATE DESCRIPTIONS
Control State:
Mnemonic:
Binary Op-Code: XXX XXX 000 110
/W: HIGH /AV: HIGH PA:AA: n/c Scope: S
Description: Reads the contents of the Configuration
register to the DQ31–0 bus. DSC must be LOW.
Read Configuration Register
RD FR
REGISTER READ/WRITE
Control State:
Mnemonic:
No Operation
NOP Binary
Binary Op-Code: XXX XXX 000 011
/W: LOW /AV: HIGH PA:AA: n/c Scope: n/a
Description: No operation. The device performs no
operation during the cycle. No existing states change. DSC
must be LOW.
Control State:
Mnemonic:
Write Device Select Register
WR DS{MRnnn}
Binary Op-Code: XXX nnn 001 000
Control State:
Mnemonic:
Binary Op-Code: XXX XXX 000 011
Read Next Free Address
RD NFA
/W: LOW /AV: HIGH PA:AA: n/c Scope: AS
Description: Writes data from the DQ31–0 bus to the
Device Select register. The write is masked by the contents
of Mask Register nnn. When nnn=000 no mask is used;
when masking is selected, only bits in the addressed
location that correspond to LOW values in the selected
mask register are updated. DSC must be LOW.
/W: HIGH /AV: HIGH PA:AA: n/c Scope: NFD
Description: Reads the value of the Next Free address on
the DQ11–0/DQ12–0 bus. In a vertically cascaded system
this will be in the device whose /FI=LOW and /FF=HIGH,
and at the highest-priority location whose Validity bit is set
HIGH. This value is the address of the location where a
subsequent Write at Next Free Address cycle will be
written. The Page address of the device value is output
DQ19–16; DQ31–20 are LOW. DSC must be LOW.
Control State:
Mnemonic:
Read Device Select Register
RD DS
Binary Op-Code: XXX XXX 001 000
/W: HIGH AV: HIGH PA:AA: n/c Scope: S
Description: Reads the contents of the Device Select
register to the DQ31–0 bus. DSC must be LOW.
Control State:
Mnemonic:
Write Address Register
WR AR{MRnnn}
Binary Op-Code: XXX nnn 000 100
Control State:
Mnemonic:
Binary Op-Code: XXX XXX 000 111
/W: HIGH /AV: HIGH PA:AA: n/c Scope: HPD/S
Description: Reads the contents of the Status register to
the DQ31–0 bus. After a Comparison or Read/Write at
Highest-Priority Matching Address cycle only the
highest-priority device with a match responds to this
Read Status Register
RD SR
/W: LOW /AV: HIGH PA:AA: n/c Scope: AS
Description: Writes data from the DQ31–0 bus to the
Address register. The write is masked by the contents of
Mask Register nnn. When nnn=000 no mask is used; when
masking is selected, only bits in the addressed location
that correspond to LOW values in the selected mask
register are updated. DSC must be LOW.
control state; in the event of
a mismatch, the
Control State:
Mnemonic:
Binary Op-Code: XXX XXX 000 100
/W: HIGH /AV: HIGH PA:AA: n/c Scope: S
Description: Reads the contents of the Address register to
the DQ31–0 bus. DSC must be LOW.
Read Address Register
RD AR
lowest-priority device responds. After a random access
Read or Write cycle into the Memory array, RD SR will
take place in any selected device. DSC must be LOW.
Control State:
Mnemonic:
Write Comparand Register
WRs CR{MRnnn}
Binary Op-Code: XXX nnn 000 101
Control State:
Mnemonic:
Binary Op-Code: XXX nnn 000 110
/W: LOW /AV: HIGH PA:AA: n/c Scope: AS
Description: Writes data from the DQ31–0 bus to the
Configuration register. The write is masked by the
contents of Mask Register nnn. When nnn=000 no mask is
used; when masking is selected, only bits in the addressed
location that correspond to LOW values in the selected
mask register are updated. DSC must be LOW.
Write Configuration Register
WR FR{MRnnn}
/W: LOW /AV: HIGH PA:AA: n/c Scope: AS
Description: Writes data from the DQ31–0 bus to bits
31-0 (DSC LOW) or 63-32 (DSC HIGH) of the
Comparand register. The write is masked by bits 31–0
(DSC LOW) or 63-32 (DSC HIGH) of Mask Register nnn.
When nnn=000 no mask is used; when masking is
selected, only bits in the addressed location that
correspond to LOW values in the selected mask register
are updated.
18
Rev. 7.1
MUSIC [ MUSIC SEMICONDUCTORS ]
