■ Specifications and Test Methods
No Item
Specification
Test Method(Ref. Standard:JIS C 5101, IEC60384）
Appearance
Capacitance Change
No defects or abnormalities.
Within +/-2%
Mounting method
Flexure
Reflow solder the capacitor on the test substrate(100×40mm)
1mm
10 Substrate Bending test
Holding Time
5+/-1s
95% of the terminations is to be soldered evenly and continuously.
Test Method
Flux
Preheat
Kind of Solder
Test Temperature
Test Time
Solder bath method
Solution of rosin ethanol 25(mass)%
80℃ to 120℃、10s to 30s
Sn-3.0Ag-0.5Cu(Lead Free Solder)
245+/-5℃
11 Solderability
2+/-0.5s
Immersing in speed
25+/-2.5mm/s
Appearance
Capacitance Change
Q or D.F.
I.R.
Voltage proof
No defects or abnormalities.
Within +/-2%
Within the specified initial value.
Within the specified initial value.
No defects or abnormalities.
Test Method
Solder bath method
Sn-3.0Ag-0.5Cu(Lead Free Solder)
260+/-5℃
10+/-1s
120℃ to 150℃
1 min
12 Resistance to Soldering
Heat
Kind of Solder
Test Temperature
Test Time
Preheat Temperature
Preheat time
Immersing in speed
Post-treatment
25+/-2.5mm/s
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance Change
Q or D.F.
No defects or abnormalities.
Within +/-2%
Q≧500
Mounting method
Cycles
Temperature Cycling
Solder the capacitor on the test substrate
5cycles
13 Temperature Sudden
Change
I.R.
Voltage proof
Within the specified initial value.
No defects or abnormalities.
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance Change
Q or D.F.
I.R.
Voltage proof
No defects or abnormalities.
Within +/-2%
Q≧350
More than 10MΩ･μF
No defects or abnormalities.
Mounting method
Test Temperature
Test Humidity
Test Time
Solder the capacitor on the test substrate
40+/-2℃
90%RH to 95%RH
500+24/-0h
14 Humidity (Steady state)
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance Change
Q or D.F.
No defects or abnormalities.
Within +/-2%
Q≧350
Mounting method
Test Temperature
Test Time
Solder the capacitor on the test substrate
Maximum Operating Temperature +/-3℃
1000+48/-0h
15 Durability
I.R.
Voltage proof
More than 10MΩ･μF
No defects or abnormalities.
Test Voltage
Charge/discharge current 50mA max.
150% of the rated voltage
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
GRM31C5C2E223JWA3-00B
3
MURATA [ muRata ]
