• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
!Note
C02E.pdf
10.12.20
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series Specifications and T st Methods (2) (Note 1)-Typical Inspection
GRM Series Specifications and Test Methods (2) (Note 1)-Typical Inspection
(Note 1) These Specifications and Test Methods indicate typical inspection.
Please refer to individual specifications (our product specifications or the approval sheet).
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
Continued from the preceding page.
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
No.
Item
Specifications
Test Method
Appearance
No defects or abnormalities
Apply the rated voltage at 40±2°C and 90 to 95% humidity for
500±12 hours. The charge/discharge current is less than 50mA.
Capacitance
Change
B1, B3, R1, R6, R7, C6, C7, C8, E7, D7, D8: Within ±12.5%
F1, F5: Within ±30%
High
•Initial measurement
Temperature
16 High
Humidity
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
B1, B3, R1, R6, R7, C6, C7, *C8, E7, D7, D8: 0.2 max.
F1, F5: 0.4 max.
*GRM319C81A106, GRM31MC81A106: 0.125 max.
D.F.
(Steady)
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
I.R.
More than 12.5Ω · F
Appearance
No defects or abnormalities
Apply 150%* of the rated voltage for 1000±12 hours at the
maximum operating temperature ±3°C. Let sit for 24±2 hours at
room temperature, then measure.
The charge/discharge current is less than 50mA.
* Part Numbers with # have individual specification.
As for these Part Numbers, please refer to table A.
B1, B3, R1, *R6, R7, C6, C7, *C8, E7, D7, D8: Within ±12.5%
F1, F5: Within ±30%
*GRM188C8 0E/0G 106, GRM219R60G226: within ±15%
Capacitance
Change
B1, B3, R1, R6, R7, C6, C7, *C8, E7, D7, D8: 0.2 max.
F1, F5: 0.4 max.
*GRM319C81A106, GRM31MC81A106: 0.125 max.
D.F.
I.R.
17 Durability
•Initial measurement
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature. Perform the
initial measurement.
More than 25Ω · F
•Measurement after test
Perform a heat treatment at 150+0/–10°C for one hour and
then let sit for 24±2 hours at room temperature, then measure.
Table A
Dimension
LZW (mm)
Rated Volt.
(Vdc)
Capacitance
(F)
Cap. Tol
(% )
Spec. Test
Methods
Applied Testing
Voltage at Durability
Part Number
Temp. Char.
GRM155C80J684KE15D
GRM155C80J684ME15D
GRM188C80G106ME47D
GRM21BC80J226ME51L
GRM319D71C475KA12D
GRM319D71C475MA12D
1.0Z0.5
1.0Z0.5
1.6Z0.8
2.0Z1.25
3.2Z1.6
3.2Z1.6
X6S
X6S
X6S
X6S
X7T
X7T
6.3
6.3
4
6.3
16
16
0.68µ
0.68µ
10µ
22µ
4.7µ
4.7µ
±10%
±20%
±20%
±20%
±10%
±20%
(2)
(2)
(2)
(2)
(2)
(2)
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Rated Volt. Z100%
Part Numbers of table A are designed for use in the
circuits where continuous applied voltage to the
capacitor is derated than rated voltage.
• Recommended Derating Conditions on Voltage and Temperature
120
These Part Numbers guarantee Durability Test with
100% x rated voltage as testing voltage at the
maximum operating temperature.
The following voltage and temperature derating
conditions are recommended for use to ensure the
same reliability level as normal specification.
100
80
60
40
20
0
Product
for 125°C
Product
for 105°C
Product
for 85°C
0
25
50
75
100
125
150
Temperature at Product (°C)
60
MURATA [ muRata ]
