• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
!Note
C02E.pdf
sales representatives or product engineers before ordering.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering0. 9.9.18
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Test Method
Appearance
No marking defects
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
W24
Capacitance
Change
for 500
hrs.
Within T15%
Y00
Remove and let sit for 24T2 hrs. at room condition*, then
Humidity
measure.
#Pretreatment
Perform a heat treatment at 150
17 (Steady
State)
D.F.
I.R.
0.05 max.
More than 1,000MΩ
W00
Y10
D for 60T5 min. and then
Dielectric
Strength
let sit for 24T2 hrs. at room condition*.
In accordance with item No.4
No marking defects
Within T20%
Appearance
Apply voltage and time as Table at maximum operating temperature
T3D. Remove and let sit for 24T2 hrs. at room condition*, then
measure. The charge / discharge current is less than 50mA.
Capacitance
Change
Nominal Capacitance
CU10,000pF
Test Voltage
AC300V (r.m.s.)
AC500V (r.m.s.)
hrs.
Test Time
W48
D.F.
I.R.
0.05 max.
1,000
hrs.
Y10
W48
*
CF10,000pF
1,500
Y10
More than 1,000MΩ
18 Life
* Except that once each hour the voltage is increased to
AC1,000V (r.m.s.) for 0.1 sec.
Dielectric
Strength
In accordance with item No.4
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
Appearance
No marking defects
Apply the rated voltage at 40T2D and relative humidity of 90 to
W24
Capacitance
Change
95% for 500
hrs.
Within T15%
Y00
Remove and let sit for 24T2 hrs. at room condition*, then
measure.
#Pretreatment
Apply test voltage for 60T5 min. at test temperature.
Remove and let sit for 24T2 hrs. at room condition*.
Humidity
19
D.F.
I.R.
0.05 max.
Loading
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
* "Room condition" Temperature: 15 to 35D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
14
190
MURATA [ muRata ]
