MIL-PRF-38534 CERTIFIED
M.S.KENNEDY CORP.
FEATURES:
100 VOLT 10 AMP RAD-HARD
H-BRIDGE PWM MOTOR
DRIVER/AMPLIFIER
4204RH
(315) 701-6751
4707 Dey Road Liverpool, N.Y. 13088
Total Dose Tested To TBDK RAD (Method 1019.7 Condition A)
100 Volt, 10 Amp Capability
Self-Contained Smart Lowside/Highside Drive Circuitry
Internal PWM Generation, Shoot-through Protection
Isolated Case Allows Direct Heatsinking
Available Fully Screened To MIL-PRF-38534 Class K and Class H
Output Stage Includes Blocking and Reverse Diodes
Contact MSK for MIL-PRF-38534 Qualification and Appendix G (Radiation Status)
DESCRIPTION:
The MSK 4204RH is a radiation hardened complete H-Bridge microcircuit intended for use in DC brushed motor control
applications or Class D switchmode amplification in space or other severe operating environments. The internal compo-
nents have been selected to provide total dose up to 300K RAD for military and space applications. All of the drive/control
circuitry for the lowside and highside switches are internal to the device. The PWM circuitry is internal as well, leaving the
user to only provide an analog signal for the motor speed/direction, or audio signal for switchmode audio amplification. If
100% duty cycle is required, access to the high-side bias has been provided. With the addition of two isolated power
supplies 100% duty cycle is possible. The MSK 4204RH is packaged in a space efficient isolated power package, available
in three lead form configurations that can be directly connected to a heatsink.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
1
2
3
4
5
6
7
1
PIN-OUT INFORMATION
GND
GND
GND
NC
GND
GND
INPUT
8
9
10
11
12
13
14
NC
NC
NC
GND
GND
NC
SHUTDOWN
15
16
17
18
19
20
21
NC
+VCC
+VCC
BV-
NC
BØ
BVB
22
23
24
25
26
27
28
BV+
NC
AV-
NC
AØ
AVB
AV+
PRELIMINARY Rev. A 6/08