MSK1911 参数 Datasheet PDF下载

TYPICAL CONNECTION CIRCUIT

The connection circuit shown above is for the MSK 1911. Lp is an optional external component and must not be

located near ground planes if possible. Use an inductor with a high self-resonant frequency that can withstand the

currents required for the application. The ferrite beads should be located as close to the DUT as possible. Fare-Rite

Corporation P/N 2743001111 beads work well for most applications. For additional applications information, please

contact the factory. Evaluation amplifiers with test boards are readily available from M.S.Kennedy Corp.

NOTES:

5

Rev. D

8/00