RJ-45 10/100 BASE-TX Jack
with Magnetic Module
N51XX Series
•
Single port shielded RJ-45 connector with 10/100 Magnetics
•
Operating temperature: 0°C to 70°C
•
Storage temperature: -40°C to 85°C
•
Available for all 10/100 transceiver Phy chips
•
Complies with IEEE standards and all 10/100 Ethernet
specifications including 350μH with 8mA DC Bias
•
1500Vrms Isolation
ELECTRICAL SPECIFICATION @ 25°C
Part Number
Insertion Loss
(dB max.)
0.3-100
MHz
N5110
N5120
N5130
-1
-1
-1
1-30
MHz
-18
-18
-18
Return Loss
(dB min.)
30-60
MHz
18-20Log(f/30MHz)
18-20Log(f/30MHz)
18-20Log(f/30MHz)
60-80
MHz
-12
-12
-12
Common to Common
Mode Rejection
(dB min.)
0.1-100
MHz
-35
-35
-35
Common to Diferential
Mode Rejection
(dB min.)
0.1-100
MHz
-40
-40
-40
Crosstalk
(dB min.)
0.5-100
MHz
-35
-35
-35
•
Note:
1) Contact: 30 micro inch selective gold plating
2) Plastic Housing: Glass filled polyester UL94V-0
3) Pins: Phosphor bronze t=0.35mm
4)Operating Life: 750 cycles min.
5) PCB retention pre-solder: 1 Lb min.
6) PCB retention post- solder: 10 Lbs min.
• Other versions available with alternate pin-out configurations. Contact MPS Engineering Team.
Mechanical
0.75
[19.05]
0.62
[15.75]
0.85
[21.59]
Ø0.035
[Ø0.89]
0.050
[1.27]
0.025
[0.63]
0.100
[2.54]
0.100
[2.54]
Pin 1
0.53
[13.59]
0.60
[15.19]
0.250
[6.35]
0.120
[3.05]
0.01
[0.25]
0.18
[4.57]
0.100
[2.54]
0.425
[10.79]
0.050
[1.27]
0.450
[11.43]
Ø0.062
[Ø1.57]
0.61
[15.49]
Pin 1
8
Ø0.128
[Ø3.25]
Suggested Pad Layout
Dimensions
Unless otherwise specified, all tolerances are:
.XX
±
0.010” & .XXX
±
0.003”
Inches
[mm]
Product performance is limited to specified parameter. Data is subject to change without prior notice.
N3XXXS-A
0443TA
1
2463 208th, Ste. 205
Torrance, CA 90501
Phone: (310)533-1455
Fax:
(310)533-1853
http://www.mpsind.com
Email: sales@mpsind.com