MP2004-DUAL, LOW NOISE, HIGH PSRR, 200mA LINEAR REGULATOR
ABSOLUTE MAXIMUM RATINGS
(1)
Thermal Resistance
(4)
Supply Input Voltage ................................. 6.5V
Continuous Power Dissipation
(T
A
= +25°C)
(2)
........................................................... 0.45W
Operation Temperature Range ... -40°C to 85°C
Storage Temperature Range ..... -65°C to 150°C
Lead Temperature (Soldering, 10sec) .....260°C
TSOT23-6 ..............................220 ....110. .
°C/W
Notes:
1) Exceeding these ratings may cause permanent damage to
the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance
θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX)=(T
J
(MAX)-
T
A
)/
θ
JA
. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) The device is not guaranteed to function outside its operating
conditions.
4) Measured on JESD51-7 4-layer board.
θ
JA
θ
JC
Recommended Operating Conditions
(3)
Supply Input Voltage.......................2.5V to 6.0V
Enable Input Voltage .........................0V to 6.0V
Junction Temperature Range . –40°C to +125°C
MP2004 Rev. 0.92
4/6/2010
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
3