MP20045 – LOWER NOISE, 1A LINEAR REGULATOR
ABSOLUTE MAXIMUM RATINGS
(1)
Recommended Operating Conditions
(3)
VIN, EN, PG, FB to GND ...............–0.3V to +6V
OUT to GND ........................ –0.5V to V
IN
+ 0.5V
(2)
Continuous Power Dissipation (T
A
=+25°C )
QFN8 (3x3) ......................................................2.0W
SOIC8E ............................................................2.0W
Free Air Temperature (T
A
)............. -40°C to 85°C
Storage Temperature Range ..... -65°C to 150°C
Lead Temperature (Soldering, 10sec)...........260°C
Supply Input Voltage.......................2.5V to 5.5V
Enable Input Voltage..........................0V to 5.5V
Operating Junction Temperature Range (T
J
)
.................................................... –40°C to 125°C
Thermal Resistance
(4)
QFN8 (3x3) .............................50 ...... 12 ...
°C/W
SOIC8E ...................................50 ...... 10 ...
°C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance
θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX)=(T
J
(MAX)-
T
A
)/
θ
JA
. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7 4-layer board.
θ
JA
θ
JC
ESD Susceptibility
HBM (Human Body Mode)........................... 2kV
MM (Machine Mode) .................................. 200V
MP20045 Rev. 0.92
1/4/2010
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
3