MP20045 – LOWER NOISE, 1A LINEAR REGULATOR
ORDERING INFORMATION
Part Number*
MP20045DQ**
MP20045DQ-15**
MP20045DQ-18**
MP20045DQ-25**
MP20045DQ-33**
MP20045DN**
Output Voltage
Package
QFN8 (3mm x 3mm)
QFN8 (3mm x 3mm)
QFN8 (3mm x 3mm)
QFN8 (3mm x 3mm)
QFN8 (3mm x 3mm)
SOIC8E
Top Marking Free Air Temperature (TA)
8K
Adjustable
1.5V
2V
3V
1.8V
2.5V
3.3V
9Z
2S
-40C to +85C
Adjustable
1.8V
M20045DN
20045-18
MP20045DN-18**
SOIC8E
* For fixed output voltage versions between 1.5V and 5V, add suffix –XX (e.g. MP20045DQ-33 is the 3.3V fixed
output). Contact factory for availability.
** For Tape & Reel, add suffix –Z (e.g. MP20045DQ–Z, MP20045DN–Z);
For RoHS compliant packaging, add suffix –LF (e.g. MP20045DQ–LF–Z, MP20045DN–LF–Z).
PACKAGE REFERENCE
QFN8 (3mm x 3mm)
SOIC8E
Thermal Resistance (4)
QFN8 (3x3).............................50 ......12 ...C/W
SOIC8E..................................50 ......10 ...C/W
θJA θJC
ABSOLUTE MAXIMUM RATINGS (1)
VIN, EN, PG, FB to GND ............... -0.3V to +6V
OUT to GND.........................-0.5V to VIN + 0.5V
(2)
Notes:
Continuous Power Dissipation (TA=+25C)
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ(MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-
TA)/ θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
QFN8 (3x3)......................................................2.0W
SOIC8E ............................................................2.0W
Free Air Temperature (TA)..............-40°C to 85°C
Storage Temperature Range .....-65°C to 150°C
Lead Temperature (Soldering, 10sec)...........260°C
ESD Susceptibility
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7 4-layer board.
HBM (Human Body Mode)...........................2kV
MM (Machine Mode)..................................200V
Recommended Operating Conditions (3)
Supply Input Voltage...................... 2.5V to 5.5V
Enable Input Voltage ........................ 0V to 5.5V
Operating Junct. Temp (TJ)......-40C to +125C
MP20045 Rev. 1.01
4/21/2017
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
2