MP1924A―100V, 4A HIGH FREQUENCY HALF-BRIDGE GATE DRIVER
APPLICATION INFORMATION
The input signals of INH and INL can be
controlled independently. If both INH and INL
control the high-side and low-side MOSFETs of
the same bridge, set a sufficient dead time
between INH and INL low (and vice versa) to
avoid a shoot-through (see Figure 3). Dead time
is defined as the time interval between INH low
and INL low.
No shoot through
No shoot through
Figure 3: Shoot-Through Timing Diagram
MP1924A Rev. 1.1
2/8/2018
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2018 MPS. All Rights Reserved.
12
MPS [ MONOLITHIC POWER SYSTEMS ]
