MP1469 – SYNCHRONOUS, STEP-DOWN CONVERTER WITH INTERNAL MOSFETS
ORDERING INFORMATION
Part Number*
MP1469GJ
Package
TSOT23-6
Top Marking
ADM
* For Tape & Reel, add suffix –Z (e.g. MP1469GJ–Z);
PACKAGE REFERENCE
TOP VIEW
ABSOLUTE MAXIMUM RATINGS
(1)
V
IN
..................................................-0.3V to 17V
V
SW
......................................................................
-0.3V (-5V for <10ns) to 17V (19V for <10ns)
V
BS
......................................................... V
SW
+6V
All Other Pins ...................................–0.3V to 6V
(2)
Continuous Power Dissipation (T
A
= +25°C)
........................................................... 0.57W
Junction Temperature ...............................150°C
Lead Temperature ....................................260°C
Storage Temperature................. -65°C to 150°C
Thermal Resistance
(4)
θ
JA
θ
JC
TSOT-23-6............................. 220 .... 110.. °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance
θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX) = (T
J
(MAX)-T
A
)/θ
JA
. Exceeding the maximum allowable power
dissipation will cause excessive die temperature, and the
regulator will go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.
Recommended Operating Conditions
(3)
Supply Voltage V
IN
...........................4.7V to 16V
Output Voltage V
OUT
.................... 0.8V to Vin-3V
Operating Junction Temp. (T
J
). -40°C to +125°C
MP1469 Rev. 1.01
8/26/2013
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
2