MP100L EASYPOWERTM – OFFLINE INDUCTOR-LESS REGULATOR
Power-Good
The MP100L integrates a power-good circuit to
signal that the output meets the controller IC’s
requirements. It is an open drain structure and
requires a pull-up resistor to VOUT. During start
up, the VOUT voltage rises smoothly. When it
reaches 80% of its normal value, the power-good
signal goes high after a 245µs delay to indicate a
normal output.
MP100L Rev. 1.0
11/3/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
11
MPS [ MONOLITHIC POWER SYSTEMS ]
