HR1000 – RESONANT HALF-BRIDGE CONTROLLER
MPS CONFIDENTIAL AND PROPRIETARY INFORMATION – INTERNAL USE ONLY
ORDERING INFORMATION
Part Number*
Package
Top Marking
HR1000HS
SOIC16
HR1000
* For Tape & Reel, add suffix –Z (e.g. HR1000HS–Z).
For RoHS compliant packaging, add suffix –LF (e.g. HR1000HS–LF–Z)
PACKAGE REFERENCE
ABSOLUTE MAXIMUM RATINGS (1)
Symbol
VBST
VSW
dVSW/dt
VCC
VPFC
IPFC
Pin
16
14
14
12
9
Parameter
Value
-1 to 618
-3 to VBST-18
50
Self-limited
-0.3 to VCC
Self-limited
2
Unit
V
V
V/ns
V
V
A
mA
V
Floating Supply Voltage
Floating Ground Voltage
Floating Ground Max. Slew Rate
IC Supply Voltage (ICC<25mA)
Maximum Voltage (pin open)
Maximum Sink Current (pin low)
Maximum Source Current
Maximum Voltage
9
4
IFset
LG
11
1 to 8
-0.3 to 16
-0.3 to 6
Analog Inputs and Outputs
V
(2)
PIC
1.56
W
Continuous Power Dissipation (TA = +25°C)
Junction Temperature
Lead Temperature (Solder)
Storage Temperature
TJ
TLead
TStorage
150
260
-55 to +150
°C
°C
°C
Notes:
Recommended Operating Conditions (3)
Supply Voltage VCC..................... 13V to 15.5V
Analog inputs and outputs ............ -0.3V to 6.5V
Operating Junction Temp (TJ). -40°C to + 125°C
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ(MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by D(MAX)=(TJ(MAX)-
TA)/ θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
Thermal Resistance (4)
θJA θJC
SOIC16...................................80.......35 ...°C/W
3) The device is not guaranteed to function outside of its operating
conditions.
4) Measured on JESD51-7, 4-layer PCB.
HR1000 Rev. 1.04
10/11/2013
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
3
MPS [ MONOLITHIC POWER SYSTEMS ]
