Model Selection Guide
Input
Model
Number
D101VHI
D102VHI
D103VHI
D104VHI
D105VHI
D106VHI
D111VHI
D112VHI
D113VHI
D114VHI
D115VHI
D116VHI
Voltage (VDC)
Nominal
5
5
5
5
5
5
12
12
12
12
12
12
Range
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
4.5 - 5.5
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
10.8 - 13.2
Load
Voltage
Current
Current Regulation
Full-Load No-Load (VDC) (mA, Max) (mA, Min) (%, Max)
Current (mA)
303
291
295
303
267
287
126
121
123
126
108
117
55
55
55
55
55
55
30
30
30
30
30
30
5.0
12.0
15.0
±5.0
±12.0
±15.0
5.0
12.0
15.0
±5.0
±12.0
±15.0
200.0
80.0
65.0
±100.0
±40.0
±35.0
200.0
80.0
65.0
±100.0
±40.0
±35.0
4.0
2.0
1.0
±2.0
±1.0
±1.0
4.0
2.0
1.0
±2.0
±1.0
±1.0
10
8
8
10
8
8
10
8
8
10
8
8
Output
Efficiency
(%, Typ)
66
66
66
66
72
73
66
66
66
66
74
75
Fuse Rating
Slow-Blow
(mA)
500
500
500
500
500
500
200
200
200
200
200
200
Notes:
1. Output load regulation is specified for a load change of 20%
to 100%.
2. When measuring output ripple, it is recomended that an exter-
nal 0.33
µF
ceramic capacitor be placed from the +Vout pin to
the -Vout pin for single output units and from each output to
common for dual output units.
3. Operation at no-load will not damage these units. However,
they may not meet all specifications.
4. Dual output units may be connected to provide a 10 VDC, 24
VDC or 30 VDC output. To do this, connect the load across the
positive (+Vout) and negative (-Vout) outputs and float the
output common.
5. It is recommended that a fuse be used on the input of a power
supply for protection. See the table above for the correct rat-
ing.
Derating Curve
Mechanical Dimensions
Pin Connections
Pin
1
2
5
6
7
Single
+Vin
-Vin
-Vout
No Pin
+Vout
Dual
+Vin
-Vin
-Vout
Common
+Vout
NC: No Connection
Capacitive Load
Single Output
µF
Max
680
Dual Output
µF
Max
±220
Mechanical Notes:
•
All dimensions are typical in inches (mm)
•
Tolerance x.xx = ±0.01 (±0.25)
MicroPower Direct
www.micropowerdirect.com
•
292 Page Street Ste D Stoughton, MA 02072
TEL: (781) 344-8226
•
FAX: (781) 344-8481
•
E-Mail: sales@micropowerdirect.com
MPD [ MICROPOWER DIRECT, LLC ]
