ISSUE 4.2 : November 1998
PUMA 68F4006/A-70/90/12
Absolute Maximum Ratings (1)
max
unit
V
V
Voltage on any pin w.r.t. Gnd
Supply Voltage(2)
-2.0 to +7
-2.0 to +7
-2.0 to +14
Voltage on A9 w.r.t. Gnd (3)
Storage Temperature
V
-65 to +125 °C
Notes : (1) Stresses above those listed may cause permanent damage to the device. This is a stress rating only and functional
operationof the device at those or any other conditions above those indicated in the operational sections of this
specification
is not implied.
(2) Minimum DC voltage on any input or I/O pin is -0.5V. Maximum DC voltage on output and I/O pins is Vcc+0.5V
During transitions voltage may overshoot by +/-2V for upto 20ns
(3) Minimum DC input voltage on A9 is -0.5V during voltage transitions, A9 may overshoot Vss to -2V for periods of up to
20ns, maximum DC input voltage in A9 is 12.5V which may overshoot to 14.0V for periods up to 20ns
Recommended Operating Conditions
Parameter
Supply Voltage
Input High Voltage
Input Low Voltage
Operating Temperature
min
4.5
2.0
-0.5
0
typ
5.0
max
5.5
VCC+0.5
0.8
unit
V
V
V
°C
VCC
VIH
VIL
TA
TAI
TAM
-
-
-
-
-
70
85
125
-40
-55
OC (-I suffix)
OC (-M suffix)
DC Electrical Characteristic (TA=-55°C to +125°C,VCC=5V ± 10%)
Parameter
I/P Leakage CurrentAddress, OE, WE ILI1
A9 Input Leakage Current ILI2
Symbol Test Condition
min
typ max Unit
VCC=VCC max, VIN=0V or VCC
VCC=VCC max, A9=12.5V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
±4 µA
200 µA
±1 µA
±4 µA
120 mA
62 mA
33 mA
Other Pins ILI3
ILO
VCC=VCC max, VIN=0V or VCC
VCC=VCC max, VOUT=0V or VCC
Output Leakage Current
VCC Operating Current
32 bit ICCO32 CE=VIL(1), OE=VIH, IOUT=0mA, f=6MHz
16 bit ICCO16 As above
8 bit ICCO8
As above
VCC Program/Erase Current 32 bit ICCP32 Programming in Progress
16 bit ICCP16 As above
-
-
-
-
-
-
200 mA
102 mA
53 mA
8 bit ICCP8
As above
(1)
Standby Supply Current
ISB1
VCC=VCC max, CE=VIH OE = VIH
VCC = 5.0V
-
-
-
-
-
-
4
12.5
0.45
-
mA
V
Autoselect / Sector Protect Voltage
Output Low Voltage
VID
11.5
VOL
IOL=12mA. VCC = VCC min.
IOH=-2.5mA. VCC = VCC min.
-
2.4
3.2
V
Output High Voltage
VOH1
VLKO
V
Low VCC Lock-Out Voltage
3.7
V
Notes (1) CE above are accessed through CE1-4. These inputs must be operated simultaneoulsy for 32 bit operation,
in pairs in 16 bit mode and singly for 8 bit mode.
2
MOSAIC [ MOSAIC ]
