OUTLINE DIMENSIONS & pIN CONNECTIONS
MECHANICAL DIMENSIONS
RECOMMENDED FOOTPRINT
19.50 [0.768]
9.35 [0.368]
1
2
5
6
7
6.00 [0.236]
4.10 [0.161]
2.54 [0.100]
19.50 [0.768]
15.24 [0.600]
(Bottom View)
6.00 [0.236]
0.25 [0.010]
0.60[0.024]
1.75 [0.069]
TUBE OUTLINE DIMENSIONS
8.30 [0.327]
Note
Unit
Pinsection tolerances:± 0.10mm[
General tolerances 0.25mm[
:
:
mm[inch]
± 0.004inch
0.010inch]
±
]
:±
11.70 [0.461]
17.21 [0.677]
FOOTPRINT DETAILS
0.75 [0.030]
E_S-1WR F_S-1WR
PIN
1
Vin
GND
-Vo
0V
Vin
GND
0V
5.00 [0.197]
2
Note
Unit
General tolerances :± 0.50mm[
:
:
mm[inch]
5
±0.020inch]
L=530mm[20.866inch] Devices per tube quantity: 25pcs
L=220mm[8.661inch] Devices per tube quantity: 10pcs
6
No Pin
+Vo
Short tube inner package box dimensions: 255*170*80mm
Short tube outer package carton dimensions: 375*280*270mm
Long tube inner package box dimensions: 580*200*100mm
7
+Vo
Long tube outer package carton dimensions(with two inner package boxes): 600*215*220mm
Long tube outer package carton dimensions(with three inner package boxes):600*215*325mm
Note:
1. Operation under minimum load will not damage the converter; However, they may not meet all specification listed, and that will reduce the life
of product.
2. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
3. In this datasheet, all the test methods of indications are based on corporate standards.
4. Only typical models listed, other models may be different, please contact our technical person for more details.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
E_S-1WR & F_S-1WR A/4-2010 Page 3 of 3
MORNSUN [ MORNSUN SCIENCE& TECHNOLOGY LTD. ]
