FEATURES AND SPECIFICATIONS
Mini-Fit CPI™
Application Tooling
This application tooling was designed specifically
to press in the Mini-Fit, CP connector series 43879
Insertion Tool with Manual Press
Features
s
Tooling rotates in 90° increments allowing Mini-Fit to be
positioned in four different orientations
s
Laser locator aids in identifying pin orientation or PC board
s
Adjust able board thickness ranging from .062" to .300"
s
Accommodates left and right hand operators
s
Polarization of tooling allows connector to be loaded in the
proper orientation
s
4 to 24 circuits with change parts included
s
Fits Molex standard Manual Press
Specifications
Weight: Including Press—24.1 kg (53 lbs.)
Size: Including Press
Height—498mm (19.6")
Length—269mm (10.6")
Depth—152.4mm (6")
Rate: 120 connectors/hr depending on operator skill
Ordering Information
Description
Manual Press and Tool Kit
Tool Kit Only
Manual Press
Order No.
62200-6900
62200-5800
11-31-6356
Product No.
43879
43879
Press-In Tool
s
s
s
s
s
Backing Plate
Features
Includes one pin holder, one backing plate and 24 alignment pins
This locking assembly may be used in a wide variety of flat platen presses
A separate board support palette is required by customer
The connector is pressed into the board from the top
Tool accommodates the full range of product from 4 to 24 circuits with removable pins
Specifications
Weight: Assembly—0.91 kg (2 lbs.)
Size: Assembly
Height—19.5mm (0.8")
Length—54.5mm (2.1")
Depth—31.8mm (1.3")
Rate: 150 connectors/hr dependent on operator skill
Ordering Information
Description
Press-In Tool
Order No.
62200-9400
Product No.
43879
Alignment Pin (24)
Pin Holder
MOLEX [ Molex Electronics Ltd. ]
