Extractor Tool for 1.57mm (.062") Diameter, Standard .062" Pin and Socket Crimp Terminals
OPERATION:
HANDLE
RETRACTABLE
SPRING LOADED
TUBE
TERMINAL
RETRACTABLE
SPRING
LOADED TUBE
TERMINAL
PUSH-OUT
PIN (SOLID)
TERMINAL
LOCKING
TABS
Figure 1
Figure 2
CONNECTOR
HOUSING
CONNECTOR
HOUSING
1. The Extractor Tool must be
In Line
with the terminal as
shown. Push terminal forward in arrow direction before
using the Extractor Tool. See Figure 1.
2. The Retractable Spring Loaded Tube must depress the
Locking Tabs on the terminal before it contacts the
Terminal Push out pin. Rotate Extractor Tool while
following above instructions. See Figure 2.
3. The terminal push-out pin (solid) pushes the terminal back
through the connector hole as the retractable tube recedes
into the handle. Always re-spread the locking tabs when
reinserting the same terminal.
4. Molex does not offer repair parts for Extractor Tools due to
the inexpensive nature of these tools.
CONNECTOR
HOUSING
TERMINAL
TERMINAL
PUSH-OUT
PIN (SOLID)
RETRACTABLE
TUBE
Figure 3
Americas Headquarters
Lisle, Illinois 60532 U.S.A.
1-800-78MOLEX
amerinfo@molex.com
Far East North Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
feninfo@molex.com
Far East South Headquarters
Jurong, Singapore
65-6-268-6868
fesinfo@molex.com
European Headquarters
Munich, Germany
49-89-413092-0
eurinfo@molex.com
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
Fax: 630-969-1352
Visit our Web site at http://www.molex.com
Doc No: ATS-011030002
Revision: D
Release Date: 04-23-03
Revision Date: 03-26-08
UNCONTROLLED COPY
Page 2 of 2
MOLEX [ Molex Electronics Ltd. ]
