欢迎访问ic37.com |
会员登录 免费注册
发布采购

MT8980D-1 参数 Datasheet PDF下载

MT8980D-1图片预览
型号: MT8980D-1
PDF下载: 下载PDF文件 查看货源
内容描述: ISO- CMOS ST- BUS⑩系列数字交换机 [ISO-CMOS ST-BUS⑩ FAMILY Digital Switch]
分类和应用:
文件页数/大小: 18 页 / 124 K
品牌: MITEL [ MITEL NETWORKS CORPORATION ]
 浏览型号MT8980D-1的Datasheet PDF文件第2页浏览型号MT8980D-1的Datasheet PDF文件第3页浏览型号MT8980D-1的Datasheet PDF文件第4页浏览型号MT8980D-1的Datasheet PDF文件第5页浏览型号MT8980D-1的Datasheet PDF文件第7页浏览型号MT8980D-1的Datasheet PDF文件第8页浏览型号MT8980D-1的Datasheet PDF文件第9页浏览型号MT8980D-1的Datasheet PDF文件第10页  
MT8980D
No Corresponding Memory
- These bits give 0s if read.
Per Channel
Control Bits
7
6
5
4
3
2
1
0
BIT
2
NAME
Message
Channel
DESCRIPTION
When 1, the contents of the corresponding location in Connection Memory Low are
output on the location’s channel and stream. When 0, the contents of the corresponding
location in Connection Memory Low act as an address for the Data Memory and so
determine the source of the connection to the location’s channel and stream.
This bit is output on the CSTo pin one channel early. The CSTo bit for stream 0 is output
first.
If the ODE pin is high and bit 6 of the Control Register is 0, then this bit enables the
output driver for the location’s channel and stream. This allows individual channels on
individual streams to be made high-impedance, allowing switching matrices to be
constructed. A 1 enables the driver and a 0 disables it.
Figure 5 - Connection Memory High Bits
1
0
CSTo Bit
Output
Enable
Stream
Address
Bits
Channel
Address
Bits
7
6
5
4
3
2
1
0
BIT
7-5*
NAME
Stream
Address
Bits*
Channel
Address
Bits*
DESCRIPTION
The number expressed in binary notation on these 3 bits is the number of the ST-BUS
stream for the source of the connection. Bit 7 is the most significant bit. e.g., if bit 7 is 1,
bit 6 is 0 and bit 5 is 0, then the source of the connection is a channel on STi4.
The number expressed in binary notation on these 5 bits is the number of the channel
which is the source of the connection (The ST-BUS stream where the channel lies is
defined by bits 7, 6 and 5.). Bit 4 is the most significant bit. e.g., if bit 4 is 1, bit 3 is 0, bit 2
is 0, bit 1 is 1 and bit 0 is 1, then the source of the connection is channel 19.
4-0*
*If bit 2 of the corresponding Connection High location is 1 or if bit 6 of the Control Register is 1, then these entire
8 bits are output on the channel and stream associated with this location. Otherwise, the bits are used as indicated
to define the source of the connection which is output on the channel and stream associated with this location.
Figure 6 - Connection Memory Low Bits
2-8