0.25-3.0 GHz
High Dynamic Range Amplifier
January 2006 - Rev 30-Jan-06
CMM6004-SC
Functional Block Diagram
Ground
4
Features
0.25 to 3.0 GHz Frequency Range
41 dBm Output IP3
2.1 dB Noise Figure
14.5 dB Gain
23.5 dBm P1dB
SOT-89 SMT Package
Single Power Supply
+3V to +5V Voltage Rail
1
Input
2
3
Ground Output
Bias
Circuit Description
The CMM6004-SC is a high dynamic range amplifier designed
for applications operating within the 0.25 to 3.0 GHz
frequency range. It is an ideal solution for transmit and receive
functions where high linearity is required. The amplifier has
the flexibility of being optimized for a number of wireless
applications. The combination of low NF and high IP3 at the
same bias point make it an ideal transmit or receive solution
when used in applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS
(multichannel multipoint distribution systems) operating from
2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz.
The CMM6004-SC is packaged in a low-cost, space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
Absolute Maximum Ratings
Supply Voltage
RF Input Power
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Thermal Resistance
+6.0 V
+20 dBm
-55 ºC to +125 ºC
150 ºC
-40 ºC to +85ºC
52 ºC/W
Operation of this device above any of these parameters may cause damage.
Typical Parameters
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
Typical
2400
13.6
-15
-12
+41.0
23.0
2.3
Units
MHz
dB
dB
dB
dBm
dBm
dB
900 1900
16.5 14.5
-18
-15
-14
-10
+41.5 +41.0
23.8 23.5
1.8
2.2
Electrical Characteristics (T=25ºC)
1. Typical values reflect performance in recommended application circuit.
Unless otherwise specified, the following specifications are guaranteed at room
temperature in a Mimix/Celeritek fixture.
Parameter
Condition
Min Typ Max Units
Frequency Range
Gain
Externally matched
Input Return Loss
Externally matched
Output IP3
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
0.25
13.5
+38
1.6
120
3.0
14.5
-10
+41
2.1
23
150
5.0
GHz
dB
dB
dBm
dB
dBm
mA
V
180
Notes:
1. T = 25ºC, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 10
Characteristic Data and Specifications are subject to change without notice.
©2006
Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
MIMIX [ MIMIX BROADBAND ]
