欢迎访问ic37.com |
会员登录 免费注册
发布采购

CMM1100-QF-0N00 参数 Datasheet PDF下载

CMM1100-QF-0N00图片预览
型号: CMM1100-QF-0N00
PDF下载: 下载PDF文件 查看货源
内容描述: 2.0-18.0 GHz的砷化镓MMIC低噪声放大器, QFN [2.0-18.0 GHz GaAs MMIC Low Noise Amplifier, QFN]
分类和应用: 射频和微波射频放大器微波放大器
文件页数/大小: 8 页 / 331 K
品牌: MIMIX [ MIMIX BROADBAND ]
 浏览型号CMM1100-QF-0N00的Datasheet PDF文件第1页浏览型号CMM1100-QF-0N00的Datasheet PDF文件第2页浏览型号CMM1100-QF-0N00的Datasheet PDF文件第3页浏览型号CMM1100-QF-0N00的Datasheet PDF文件第4页浏览型号CMM1100-QF-0N00的Datasheet PDF文件第5页浏览型号CMM1100-QF-0N00的Datasheet PDF文件第6页浏览型号CMM1100-QF-0N00的Datasheet PDF文件第7页  
2.0-18.0 GHz GaAs MMIC
Low Noise Amplifier, QFN
November 2007 - Rev 02-Nov-07
CMM1100-QF
Handling and Assembly Information
CAUTION!
- Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
• Do not ingest.
• Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
• Observe government laws and company regulations when discarding this product. This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy
- Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment
- This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this
part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground
connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and
life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
Ramp Up Rate
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
SnPb
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
10-20 sec
4-6 ºC/sec
Pb Free
3-4 ºC/sec
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
4-6 ºC/sec
Factory Automation and Identification
Mimix
Designator
-QF
Package
Type
QFN (4x4mm)
Number of
leads offered
24
W Tape
Width
12mm
P
1
Component
Pitch
8mm
P
0
Hole
Pitch
4mm
Reel
Diameter
329mm (13in)
Units
per Reel
2000
Component Orientation:
Parts are to be oriented with the PIN 1 closest to the tape's round sprocket holes on the tape’s trailing edge.
Note: Tape and Reel packaging is ordered with a -000T suffix. Package is available in 2000 unit reels through designated sales channels.
Minimum order quantities should be discussed with your local sales representative.
Mimix Lead-Free RoHS Compliant Program -
Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering
Description
CMM1100-QF-0N00
Gold plated RoHS compliant 4x4 24L QFN surface mount package in bulk quantity
CMM1100-QF-0N0T
Gold plated RoHS compliant 4x4 24L QFN surface mount package in tape and reel
CMM1100-QF-EV1
CMM1100-QF evaluation board
We also offer this part with alternative plating options. Please contact your regional sales manager for more information regarding
different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 8 of 8
Characteristic Data and Specifications are subject to change without notice.
©2007
Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.