2.0-18.0 GHz GaAs MMIC
Low Noise Amplifier
February 2007 - Rev 06-Feb-07
CMM1100-BD
0.215
(0.009)
0.843
(0.033)
1.508
(0.059)
1.550
(0.061)
1.460
(0.058)
Mechanical Drawing
2 3
4
5
0.418
(0.017)
1
6
0.418
(0.017)
14 13 12 11 10
0.0
0.0
0.356 0.599 0.838
(0.014) (0.024) (0.033)
0.484 0.714
(0.019) (0.028)
9 8 7
1.245 1.480
(0.049) (0.058)
1.360 1.600
(0.054) (0.063)
(Note: Engineering designator is M425)
Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad.
Thickness: 0.076 +/- 0.010 (0.003 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold
All DC Bond Pads are 0.080 x 0.080 (0.003 x 0.003). All RF Bond Pads are 0.180 x 0.080 (0.007 x 0.003).
Bond pad centers are approximately 0.109 (0.004) from the edge of the chip.
Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 1.538 mg
Bond Pad #1 (RF In)
Bond Pad #2 (Vg1a)
Bond Pad #3 (Vg1b)
Bond Pad #4 (Vd1)
Bond Pad #5 (Vd2)
Bond Pad #6 (RF Out)
Bond Pad #7 (Rs2-9.0 )
Bond Pad #8 (Rs2-12.5 )
Bond Pad #9 (Rs2-12.5 )
Bond Pad #10 (Rs2-Off Chip)
Bond Pad #11 (Rs1-29.0 )
Bond Pad #12 (Rs1-29.0 )
Bond Pad #13 (Rs1-16.6 )
Bond Pad #14 (Rs1-Off Chip)
Bias Arrangement
Vd1,2
Bypass Capacitors
- See App Note [2]
2 3
4
5
RF In
1
6
RF Out
14 13 12 11 10
9 8 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 6
Characteristic Data and Specifications are subject to change without notice.
©2007
Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.