2.5 GHz InGaP HBT
5W Linear Power Amplifier
May 2006 - Rev 24-May-06
Features
CHV2710-QJ
Functional Block Diagram
Vcntrl
RF out
Internal Pre-matching
Single Supply operation
Power Gain - 9.5dB
Intermodulation Distortion - -30dBc @ 34dBm per tone
ESD Protection on board
Current Control for multiple applications
2.5% EVM @ 30dBm avg power, 802.16 OFDM
signal format, PAR=9.5dB
Plastic Surface mount packaging
Low Thermal Resistance
Ideal for WiMAX applications
Lead Free and RoHS compliant 6x6 QFN package
Evaluation Boards Available
Bias Circuit
RF in
Output
Match
Input
Match
CHV2710
* Backside of Package is emitter gnded
General Description
The CHV2710 internally pre-matched power HBT device
provides 9.5dB of gain, 2.5% EVM at 30dBm output power for
802.16 OFDM signal with a peak to average power ratio of
9.5dB. The device operates off a single supply voltage up to
12V and includes internal bias circuitry to enable exact setting
of the quiescent current using an external Vcontrol. This
Vcontrol is non-unique voltage setting and the same value
can be used for each part depending on the required Icq. The
device is ideal for high linearity, high data rate applications
such as WiMAX. Internal pre-matching facilitates a simplified
external matching approach and the highest in-band gain
potential of the device. The device operates with unique
matching at each of the popular WiMAX bands with the
inherent repeatability of an InGaP HBT process.
Absolute Maximum Ratings
PARAMETER
MIN
RATING
MAX
Voltage supply (Vcc)
Current (Icc)
Dissipated power (Pdiss)
Input power (Pin)
Storage temperature (Tstg)
Channel tem
perature (Tch)
Operating backside temperature (Tb)
4.5 V
-
-
-
-60 C
-
-40 C
12 V
2000 mA
18 W
30 dBm
150 C
175 C
(
3
)
(
2
)
Operation outside any of these limits can cause permanent damage.
(
3
)
C alculate maximum operating temperature Tmax using the following formula:
Tmax=175-(Pdiss [W] x 5) [C].
Room temperature.Typical bias conditions:Vcc=12V.Typical assembly.
(1)
PARAMETER
Operating frequency band
Quiescent current (depends on Vcc)
Power gain at 30 dBm power
Collector Current at 30 dBm
SYMBOL
F
Icq
Gps
Icc
MIN
TYP
2.5
730
11
775
-31
-41
MAX
UNITS
GHz
760
mA
dB
800
-30
-40
-10.0
mA
dBc
dBc
dB
dBm
Output third order distortion point at 34dBm per
IMD
tone power, f1=2650 MHz, f2=2650.1MHz
Output third order distortion point at 30dBm per
IMD
tone power, f1=2650 MHz, f2=2650.1MHz
Input reflection coefficient at 2700 MHz
Pout with 2.5% EVM under 802.16d OFDM
signal format with PAR = 9.5dB
Thermal resistance
Noise figure at 2.65GHz
IRL
Po_2.5%E
VM_9.5
Rth
NF
-
29.0
-
-
-16.0
30.0
-
4.5
5
-
C/W
dB
(
1
)
Data measured in a C eleritek matched connectorized fixture.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice.
©2006
Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
MIMIX [ MIMIX BROADBAND ]
