MT2266 SINGLE CHIP DUAL-BAND LOW POWER DVB-T/DVB-H TUNER
PRODUCT BRIEF
RECOMMENDED OPERATING CONDITIONS
PARAMETER
MIN
TYP
MAX
UNIT
UHF input frequency
range
470
862
MHz
RFin_VHF
GND
1
2
30
29
28
27
26
25
24
23
22
21
GND
VHF III input
frequency range1
174
2.6
230
3.0
15
MHz
V
RF_AGC
BB_AGC
BB_Vcc
GND
Supply voltage
2.7
RFin_UHF
GND
3
Supply voltage ripple
mV
4
Operating junction
temperature
RF_Vcc
PDout
5
Exposed die attach paddle
on package bottom
0
100
°C
6
BB_In
1. Will also support operation at other VHF III frequency ranges with
external components change.
GPO
7
BB_Ip
LOAVcc
LOreg
8
BB_Qn
BB_Qp
STDBY
9
ABSOLUTE RATINGS
LOLPF
10
PARAMETER
Supply voltage
MIN
MAX
UNIT
3.6
V
Storage temperature
-50
150
°C
Lead-free solder temperature
for 5 seconds
260
95
°C
Relative humidity
%
MT2266 Pin Diagram
VHF Band Input
I Output
0°
LNA
Input
UHF Band Input
Select
Q Output
90°
RF Power
Detector
Output
RF Power
Detector
PLL
Serial
Control
Interface
AGC
Control
SRO
CLKp CLKn
Serial
Data
RF
AGC
BB
AGC
Clock
MT2266 Block Diagram
Microtune, Inc., 2201 Tenth Street, Plano, TX 75074, USA
Tel: +1-972-673-1600, Fax: +1-972-673-1602, E-mail: sales@microtune.com, Web site: www.microtune.com
For a detailed list of design centers, sales offices, and sales representatives, visit our Web site at www.microtune.com
The information in this document is believed to be accurate and reliable. Microtune assumes no responsibility for any consequences arising from the use of this information, nor from any infringement of
patents or the rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or other rights of Microtune. The information in this publication replaces
and supersedes all information previously supplied, and is subject to change without notice. The customer is responsible for assuring that proper design and operating safeguards are observed to minimize
inherent and procedural hazards. Microtune assumes no responsibility for applications assistance or customer product design.
The devices described in this document are not authorized for use in medical, life-support equipment, or any other application involving a potential risk of severe property or environmental damage, personal
injury, or death without prior express written approval of Microtune. Any such use is understood to be entirely at the user’s risk.
Microtune is a registered trademark of Microtune, Inc. MicroTuner, MicroStreamer, VideoCaster, DataCaster, and the Microtune logo are trademarks of Microtune, Inc. All other trademarks belong to their
respective companies.
Microtune’s products are protected by one or more of the following U.S. patents: 5,625,325; 5,648,744; 5,717,730; 5,737,035; 5,739,730; 5,805,988; 5,847,612; 6,100,761; 6,104,242; 6,144,402; 6,163,684;
6,169,569; 6,172,378; 6,177,964; 6,211,745; 6,218,899; 6,268,778; 6,310,387; 6,323,736; 6,355,537; 6,429,502; 6,462,327; D469,742; 6,535,068; 6,580,313; 6,608,522; 6,631,257; 6,674,409; 6,714,776;
6,725,463, 6,744,308 B1; 6,771,124; 6,784,945; 6,804,099; 6,888,406; 6,891,435; 6,906,594; 6,920,182; 6,963,478; 6,973,288; D,469,742; DE10,011,662 and additional patents pending or filed.
Entire contents Copyright © 1996 - 2006 Microtune, Inc.
121505
MT2266 PB-00137 — Rev 1.0
April 2006
MICROTUNE [ MICROTUNE,INC ]
