FLASH
AS8F512K32
*Stresses greater than those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device. This
is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the
operation section of this specification is not implied, Exposure
to absolute maximum rating conditions for extended periods
may affect reliability.
ABSOLUTE MAXIMUM RATINGS*
Voltage on Vcc Supply Relative to Vss
Vcc (Note 1) .................................................-2.0V to +7.0V
A9 (Note 2)….........................................….. -2.0V to +14V
All Other Pins (Note 1)............…….............-2.0V to +7.0V
Operating Temperature, TA (Ambient).........55°C to +125°C
Storage Temperature .................................-65°C to +150°C
Power Dissipation………………..........................…...1.5W
Short Circuit Output Current (Note 3)…...................200mA
Lead Temperature (soldering 10 seconds).................+300°C
Junction Temperature................................................+165°C
Data Retention (Mil Temp).....................................20 Years
Endurance - Write / Erase Cycles.............. 1,000,000 Cycles
(Mil Temp)
NOTES:
1. Minimum DC voltage on input or I/O pins is -0.5V. During Voltage transitions, inputs may overshoot Vss to -2.0V for periods of
up to 20 ns. Maximum DC voltage on input or I/O pins is Vcc +0.5V. During Voltage transitions, inputs may overshoot Vcc
to +2.0V for periods of up to 20 ns.
2. Minium DC input voltage onA9 pin is -0.5V. During voltage transitions,A9 pins may overshoot Vss to -2.0V for periods of up
to 20 nS. Maximum DC input voltage on A9 is +12.5V inputs which may overshoot to +13.5V for periods of up to 20 ns.
3. No more than one output shorted at a time. Duration of the short circuit should not be greater than one second.
Capacitance Table
V = 0V, f = 1MHz, TA =25ºC
IN
Symbol
Parameter
Maximum Units
CADD
COE
A0-A18 Capactiance
OE\ Capactiance
50
50
20
20
pF
pF
pF
pF
CWE, CCE WE\ and CE\ Capactiance
CIO
I/O 0 - I/O 31 Capactiance
Micross Components reserves the right to change products or specifications without notice.
AS8F512K32
Rev. 5.4 08/10
8
MICROSS [ MICROSS COMPONENTS ]
