EEPROM
AS8E128K32
*Stresses greater than those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device. This
is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the
operation section of this specification is not implied. Ex-
posure to absolute maximum rating conditions for extended
periods may affect reliability.
**Junction temperature depends upon package type, cycle
time, loading, ambient temperature and airflow, and humid-
ity (plastics).
ABSOLUTE MAXIMUM RATINGS*
Voltage on Vcc Supply Relative to Vss
Vcc .......................................................................-.5V to +7.0V
Storage Temperature ....................... ....................-65°C to +150°C
Voltage on any Pin Relative to Vss.....................-.5V to Vcc+1 V
Max Junction Temperature**............................................+150°C
Thermal Resistance junction to case (θJC):
Package Type Q...............................................11.3° C/W
Package Type P & PN.......................................2.8° C/W
ELECTRICAL CHARACTERISTICS AND RECOMMENDED DC OPERATING CONDITIONS
(-55oC<T <125oC or -40oC to +85oC; Vcc = 5V + 10%)
A
μΑ
μΑ
MAX
SYM For All Speed Options UNITS
PARAMETER
CONDITIONS
CE\<VIL; VCC=MAX,
Power Supply Current:
Operating
250
15
1
mA
mA
mA
f = MAX = 1/tRC (MIN)
Outputs Open
I
cc
CE\>VIH; All Other Inputs
<VIL or >VIH; VCC=MAX,
f =0 Hz
ISBT1
CE\>VCC-0.2V; VCC=MAX,
VIL<VSS +0.2V or
VIH>VCC -0.2V; f = 0 Hz
ISBT2
Power Supply Current:
Standby
CE\=VCC, OE\=VIH;
I/O 0 through 31 = open;
Input=VCC=5.5Vdc.;
5
mA
ISBT3
A0 through A16 change at 5 MHz;
CMOS levels
Micross Components reserves the right to change products or specifications without notice.
AS8E128K32
Rev. 8.1 01/10
3
MICROSS [ MICROSS COMPONENTS ]
