EEPROM
AS28C010
ABSOLUTE MAXIMUM RATINGS*
*Stresses greater than those listed under “Absolute Maxi-
Voltage on Vcc Supply Relative to Vss................-0.5V to +7.0V1 mum Ratings” may cause permanent damage to the device.
Voltage on any pin Relative to Vss.......................-0.6V to +7.0V1 This is a stress rating only and functional operation of the
Storage Temperature ............................................-65°C to +150°C device at these or any other conditions above those indi-
Operating Temperature Range.............................-55oC to +125oC
cated in the operation section of this specification is not
Soldering Temperature Range...............................................260oC implied. Exposure to absolute maximum rating conditions
Maximum Junction Temperature**....................................+150°C for extended periods may affect reliability.
Power Dissipation...................................................................1.0W ** Junction temperature depends upon package type, cycle
time, loading, ambient temperature and airflow.
ELECTRICAL CHARACTERISTICS AND RECOMMENDED DC OPERATING CONDITIONS
(-55oC < TA < 125oC; Vcc = 5V +10%)
PARAMETER
CONDITION
SYMBOL
VIH
MIN
2.0
MAX
VCC + 1.0V
UNITS
Input High (Logic 1) Voltage1
Input Low (Logic 0) Voltage1
Input Leakage Current
Output Leakage Current
Output High Voltage
V
V
VIL
-1.0
0.8
10
10
VIN = VSS to VCC
OUT =VSS to Vcc, CE\=VIH
ILI
P$
P$
V
V
ILO
I
OH = -400 PA
VOH
VOL
2.4
IOL = 2.1 mA
Output Low Voltage
0.4
V
Notes: 1) VIL min. and VIH max. are for reference only and are not tested.
MAX
PARAMETER
CONDITIONS
SYM
-12
-15
-20
-25 UNITS NOTES
Power Supply Current:
Operating
I
OUT=OmA, Vcc = 5.5V
100
100
500
3
80
80
500
3
mA
ICC3
Cycle=MIN
CE\=Vcc, Vcc = 5.5V
ICC1
500
3
500
3
PA
Power Supply Current:
Standby
CE\=VIH, Vcc = 5.5V
ICC2
mA
Micross Components reserves the right to change products or specifications without notice.
AS28C010
Rev. 1.6 01/10
4
MICROSS [ MICROSS COMPONENTS ]
