SDA9410
Preliminary Data Sheet
Output sync controller (OSCM/S)
STOPMOM
0000
ADOPMOM
000
Description
force VDU CAMERA mode
0001
000
force VDU PAL film mode Phase 0
force VDU PAL film mode Phase 1
0010
000
0001
100
force VDU PAL with automatic phase detection; PAL film mode is set
only once, if it is detected; after that it will be fixed until another mode is
selected from the user; STOPMOM 0001 or 0010 is selected
automatically
0010
1110
100
100
same as STOPMOM 0001 and ADOPMOM 100
force VDU NTSC film mode with automatic phase detection; NTSC film
mode is set only once, if it is detected; after that it will be fixed until
another mode is selected from the user; STOPMOM 1110 and
STOPMOM 1111 is selected automatically
1111
0001
100
101
same as STOPMOM 1110 and ADOPMOM 100
force VDU PAL with automatic phase detection; PAL film mode is set
only once, if it is detected; after that it will be fixed until another mode is
selected from the user; in addition STOPMOM 0011 will be selected if
GMOTION is zero; STOPMOM 0001 or 0010 or 0011 is selected
automatically
0010
1110
101
101
same as STOPMOM 0001 and ADOPMOM 101
force VDU NTSC film mode with automatic phase detection; NTSC film
mode is set only once, if it is detected; after that it will be fixed until
another mode is selected from the user; in addition STOPMOM 0011 will
be selected if GMOTION is zero;STOPMOM 1110 or STOPMOM 1111
or STOPMOM 0011 is selected automatically
1111
101
same as STOPMOM 1110 and ADOPMOM 101
Table 73
Special combinations of STOPMOM and ADOPMOM
The table Table 74 "Display line-scanning pattern sequence" on page 89 shows all
possible display line-scanning pattern sequences for the different static operation modes
and the lines per field value between two consecutive output V-Syncs. It is assumed, that
in case of freerunning-mode LPFOP=156 and in locked-mode the number of lines of the
incoming field is 312.5.
88
Micronas
MICRONAS [ MICRONAS ]
